What to verify before ordering ABB AX18-30-10-80, 1SBL921074R8010
ABB AX18-30-10-80, 1SBL921074R8010 selection begins with the exact device identity and its assigned function. The values in the following table are a starting point for checking the delivered unit, not a substitute for the nameplate.
Technical identification and decision points
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | AX18-30-10-80, 1SBL921074R8010 |
| Product family | AX18 |
| Component role | three-pole motor-control contactor |
| Type | AX18-30-10-80 |
| ABB order code | 1SBL921074R8010 |
| Main poles | 3 |
| Auxiliary | 1 NO designation |
| Coil | 220–230 V 50 Hz / 230–240 V 60 Hz |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Confirm ABB AX18-30-10-80, 1SBL921074R8010 against the current ABB documentation and the actual plant duty. A range or capability from another variant must not be assumed for this exact build.
Work package
The ABB AX18-30-10-80, 1SBL921074R8010 work package needs isolation, access, disconnection and restoration steps approved for this plant. Preserve the original wiring marks and any usable settings backup.
During ABB AX18-30-10-80, 1SBL921074R8010 installation, verify adjacent equipment clearance and protective bonding without altering an approved design solely to fit a substitute.
Equipment duty and scope
ABB AX18-30-10-80, 1SBL921074R8010 is considered where the site needs to switch a rated motor starter or power circuit. Record the asset tag, circuit or loop boundary, and reason for the change before specifying a replacement.
The ABB AX18-30-10-80, 1SBL921074R8010 procurement request should distinguish the physical device from any separate accessories, configuration files, protection devices and installation materials.
Interface evidence
Before ABB AX18-30-10-80, 1SBL921074R8010 is ordered, compare AC-3 motor load, coil voltage, overload relay and auxiliary wiring. Capture the installed nameplate, a clear terminal photograph and the cabinet drawing revision.
A visual resemblance to ABB AX18-30-10-80, 1SBL921074R8010 is not proof of equivalent contacts, voltage, communication, release, connector orientation or certification.
Failure and mismatch review
If ABB AX18-30-10-80, 1SBL921074R8010 was requested after a fault, document the symptom and tests that separated component failure from wiring, supply, configuration or upstream protection problems.
If the delivered ABB AX18-30-10-80, 1SBL921074R8010 differs from the ordered complete designation, hold it for engineering comparison. Do not treat a family name as an interchangeability approval.
Purchasing handoff
Quote ABB AX18-30-10-80, 1SBL921074R8010 exactly and attach the current ABB reference alongside the equipment label. Ask the supplier to state any order-code, revision or accessory differences.
Keep a traceable ABB AX18-30-10-80, 1SBL921074R8010 comparison with the installed part and require written approval for alternatives that change electrical or control behavior.
Commissioning evidence
After fitting ABB AX18-30-10-80, 1SBL921074R8010, verify pickup, release and all three main poles. Use the site's approved safe test procedure and observe all connected interlocks and indications.
Log the ABB AX18-30-10-80, 1SBL921074R8010 serial or revision, test result, date, and witness. Restore normal operating mode only after the relevant process owner accepts the change.
Related configurations in this series
These AX18 references belong to the same product grouping as ABB AX18-30-10-80, 1SBL921074R8010, but ratings and included parts can differ. Match the entire designation before treating one as a replacement.
No other unassigned AX18 reference is grouped with ABB AX18-30-10-80, 1SBL921074R8010 in this release.
Acceptance record
For ABB AX18-30-10-80, 1SBL921074R8010, retain the final order code, supplied revision, installation findings and functional test evidence.
If ABB AX18-30-10-80, 1SBL921074R8010 is rejected or substituted, keep the reason and the approved disposition with the asset record.
