Confirming AI561(1TNE968902R1101) for an installed system
AI561(1TNE968902R1101) is the complete reference for this four-channel analog input module. Use the exact code, not only the family name, when reviewing a replacement or preparing an enquiry. The final site decision depends on the installed circuit and the marked hardware revision.
Technical identification
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | AI561(1TNE968902R1101) |
| Product family | AI561 |
| Component role | four-channel analog input module |
| Inputs | 4 analog voltage/current channels |
| Signals | Voltage or current per configured channel |
| Order code | 1TNE968902R1101 |
| Terminals | Appropriate 9- and 11-pole blocks ordered separately |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
These AI561(1TNE968902R1101) details establish the selection baseline. Check the unit label and current ABB documentation for any option or approval that is not explicit in the technical table.
What must match?
The critical AI561(1TNE968902R1101) comparison is: Check input type, ranges, terminal block, common wiring, signal grounding and the controller project channel map. Confirm each difference with the supplier and the site engineer before approving it.
Document the terminal arrangement, supply, protective coordination or communications mapping relevant to AI561(1TNE968902R1101). An alternative code can require a changed parameter set, mounting layout or approval.
What proves it works?
For AI561(1TNE968902R1101), the acceptance action is: Apply a known voltage/current signal to each channel and verify raw value, scaling and diagnostics. Record the actual observed result, not only the power-on indication.
Retain a signed record of the AI561(1TNE968902R1101) test together with faults, corrections and the final nameplate information for later maintenance and procurement.
Duty at this site
For AI561(1TNE968902R1101), the expected duty is: Acquire four process analog signals for an AC500/S500-eCo I/O station. Identify the source, the connected equipment and the permissive or alarm logic before ordering.
A useful handover record for AI561(1TNE968902R1101) includes the drawing reference, ambient condition and the operating duty. This helps distinguish a genuine equivalent from a merely similar-looking device.
Before energizing
Inspect AI561(1TNE968902R1101) and its connected wiring under the approved isolation procedure. Compare the delivered code with the order, then check mechanical seating, terminals and required accessories.
Restore only reviewed settings for AI561(1TNE968902R1101). If the original assembly contains safety or protection functions, follow the plant's dedicated validation plan before operating the load.
Codes grouped with this model
Other AI561 codes are listed here for search and procurement reference. Their suffixes may change the coil, ratings, channel layout, interfaces or accessories, so they are not declared interchangeable with AI561(1TNE968902R1101).
There is no additional unassigned AI561 designation grouped with AI561(1TNE968902R1101) here.
For the purchase enquiry
State the full AI561(1TNE968902R1101) code, installed machine or panel, quantity, required condition and delivery destination. Ask for a matching datasheet and the supplied hardware revision.
If AI561(1TNE968902R1101) is offered as a substitute or updated spare, request a written cross-reference covering mechanical fit, wiring, ratings and required project changes before approval.
