Selection file for ABB AF40-30-00-11, 1SBL347001R1100
Use the complete ABB AF40-30-00-11, 1SBL347001R1100 designation for the purchase and asset record. The short family mark alone cannot establish electrical ratings, process options or interchangeability.
Technical selection record
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | AF40-30-00-11, 1SBL347001R1100 |
| Product family | AF40 |
| Component role | three-pole AF40 motor contactor |
| Frame | AF40 |
| Main contacts | 3 normally-open |
| Control coil | 24-60 V AC or 20-60 V DC |
| Auxiliary contacts | No built-in auxiliary in -00 variant |
| Order code | 1SBL347001R1100 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Values shown for AF40-30-00-11, 1SBL347001R1100 are selection checkpoints. Confirm the fitted unit, nameplate and ABB documentation before releasing an order or a site change.
Fit and interface gate
Compare AF40-30-00-11, 1SBL347001R1100 with the existing installation for AC-3 load, coil supply, overload coordination, added contacts and panel dimensions. Keep photos of the nameplate, terminals and accessory arrangement with the enquiry.
If any connector, protective rating or configuration item differs, hold the AF40-30-00-11, 1SBL347001R1100 substitution for engineering review.
Installation sequence
Before fitting AF40-30-00-11, 1SBL347001R1100, isolate the affected system by the plant procedure and preserve the approved settings or wiring schedule. Verify mechanical seating and each identified connection.
After connecting AF40-30-00-11, 1SBL347001R1100, check power, communications and local indications before enabling the controlled equipment.
Application decision
The intended duty of AF40-30-00-11, 1SBL347001R1100 is to switch the rated motor or feeder through the designed starter circuit. Record the controlled asset, panel location and circuit or process tag next to the exact code.
A specification for AF40-30-00-11, 1SBL347001R1100 should state the operating conditions rather than assuming another AF40 item is a drop-in replacement.
Acceptance evidence
At handover for AF40-30-00-11, 1SBL347001R1100, verify coil operation, all three poles and starter interlocks. Record who witnessed the test, the measured results and any open action.
The AF40-30-00-11, 1SBL347001R1100 asset record should retain the final configuration, revision and commissioning evidence for later troubleshooting.
Related configuration codes
Other AF40 designations recorded with AF40-30-00-11, 1SBL347001R1100 are shown below for search and enquiry. Their options and ratings can differ; the list does not claim automatic interchangeability.
- AF40-30-00-13 (1SBL347001R1300)
Purchase handoff
Quote the complete AF40-30-00-11, 1SBL347001R1100 designation, the installation tag and the critical interface checks. Ask for nameplate and revision confirmation before dispatch.
When AF40-30-00-11, 1SBL347001R1100 arrives, compare the received unit to the approved selection record and document the final acceptance result.
