AF205-30-11-13, 1SFL527002R1311 application and acceptance notes
AF205-30-11-13, 1SFL527002R1311 is the complete reference for this three-pole AF205 motor contactor. Use the exact code, not only the family name, when reviewing a replacement or preparing an enquiry. The final site decision depends on the installed circuit and the marked hardware revision.
Technical identification
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | AF205-30-11-13, 1SFL527002R1311 |
| Product family | AF205 |
| Component role | three-pole AF205 motor contactor |
| Main poles | 3 normally-open power poles |
| Auxiliary contacts | 1 NO + 1 NC |
| Control voltage | 100-250 V AC/DC for -13; confirm installed unit |
| Rated motor duty | Coordinate using AC-3 rating, motor current and site supply |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
These AF205-30-11-13, 1SFL527002R1311 details establish the selection baseline. Check the unit label and current ABB documentation for any option or approval that is not explicit in the technical table.
What must match?
The critical AF205-30-11-13, 1SFL527002R1311 comparison is: Match the AF205 frame, coil suffix, auxiliary layout, overload relay, terminal design and mounting before ordering. Confirm each difference with the supplier and the site engineer before approving it.
Document the terminal arrangement, supply, protective coordination or communications mapping relevant to AF205-30-11-13, 1SFL527002R1311. An alternative code can require a changed parameter set, mounting layout or approval.
What proves it works?
For AF205-30-11-13, 1SFL527002R1311, the acceptance action is: Verify pickup and release, auxiliary feedback, overload trip path and controlled load operation for the AF205 starter. Record the actual observed result, not only the power-on indication.
Retain a signed record of the AF205-30-11-13, 1SFL527002R1311 test together with faults, corrections and the final nameplate information for later maintenance and procurement.
Duty at this site
For AF205-30-11-13, 1SFL527002R1311, the expected duty is: Switch the assigned motor or load through the AF205 starter circuit and its protective interlocks. Identify the source, the connected equipment and the permissive or alarm logic before ordering.
A useful handover record for AF205-30-11-13, 1SFL527002R1311 includes the drawing reference, ambient condition and the operating duty. This helps distinguish a genuine equivalent from a merely similar-looking device.
Before energizing
Inspect AF205-30-11-13, 1SFL527002R1311 and its connected wiring under the approved isolation procedure. Compare the delivered code with the order, then check mechanical seating, terminals and required accessories.
Restore only reviewed settings for AF205-30-11-13, 1SFL527002R1311. If the original assembly contains safety or protection functions, follow the plant's dedicated validation plan before operating the load.
Codes grouped with this model
Other AF205 codes are listed here for search and procurement reference. Their suffixes may change the coil, ratings, channel layout, interfaces or accessories, so they are not declared interchangeable with AF205-30-11-13, 1SFL527002R1311.
There is no additional unassigned AF205 designation grouped with AF205-30-11-13, 1SFL527002R1311 here.
For the purchase enquiry
State the full AF205-30-11-13, 1SFL527002R1311 code, installed machine or panel, quantity, required condition and delivery destination. Ask for a matching datasheet and the supplied hardware revision.
If AF205-30-11-13, 1SFL527002R1311 is offered as a substitute or updated spare, request a written cross-reference covering mechanical fit, wiring, ratings and required project changes before approval.
