1SBL177001R1310 AF16-30-10-13: AF16-30-10-13 contactor: motor rating, coil and auxiliary-contact checks
The ABB AF16-30-10-13 is a three-pole AF contactor with an electronic coil interface accepting a wide 100–250 V AC/DC control range. ABB lists 18 A AC-3 current and 7.5 kW at 400 V as reference motor-switching values, together with one built-in normally open auxiliary contact. Verify the actual utilization category and operating conditions before selection.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Type | AF16-30-10-13 |
| Order code | 1SBL177001R1310 |
| Main poles | 3 main NO poles |
| AC-3 current | 18 A at 380–440 V reference conditions |
| AC-3 motor power | 7.5 kW at 400 V reference |
| Coil | 100–250 V AC/DC |
| Built-in auxiliary | 1 NO |
| Main circuit | Up to 690 V AC family rating |
The table summarizes family or catalog values for identification and initial selection. Confirm the nameplate, environmental limits, standards, revision and options for the exact device before procurement or engineering approval.
Application and system selection
The contactor is intended for switching three-phase motors and other permitted power loads. Compare the motor’s rated current, starting frequency, duty cycle and reversing or inching requirements with the applicable AC-3 or other utilization-category data. Check the coil command voltage across its full tolerance range and coordinate overload and short-circuit devices in the starter.
Configuration and compatibility
AF contactors are available with several coil and auxiliary configurations. Confirm the complete suffix, built-in contact arrangement, required add-on contacts, interlocks and thermal overload relay. A contactor with the same frame size may not share the same coil or auxiliary configuration; use the order code and wiring diagram rather than appearance alone.
Related models and order-code references
The following designations are related catalog references, not automatic substitutes. Check each complete code, rating, connection, revision and application requirement before selecting a variant.
- 1SBL177001R1310, AF16-30-10-13
- AF16 -30-10-13
- AF16-30-01-11
- AF16-30-10-11 1SBL177001R0044
- AF16-30-10-13
- AF16-30-10-13 (1SBL177001R1310)
- AF16-30-10-13 1SBL177001R1310
- AF16-30-10-13*100-250V AC/DC
- AF16-40-00-11
- AF16Z-30-10-21
Installation and commissioning
Check panel spacing, conductor cross-section and terminal torque against the current data sheet. Route coil wiring away from sensitive analog circuits where practical and verify the suppression arrangement. Test pickup, dropout, auxiliary feedback and overload trip interaction before returning the motor to service.
Replacement and procurement information
For a quotation or replacement review, provide the complete designation 1SBL177001R1310 AF16-30-10-13, the order code where applicable, serial or hardware revision, quantity, operating environment, connected equipment and required delivery date. Include a legible nameplate image and relevant wiring, loop or switchgear drawing so the exact interface and configuration can be checked.
Ask the supplier to confirm accessories, revision compatibility and any approved successor in writing. Do not select solely from a family name or product photograph. Follow the current ABB installation and safety instructions for the exact unit.
