Identify AF116-30-11-13 before replacement
AF116-30-11-13 is a three-pole AF motor contactor for a defined industrial installation. When requesting AF116-30-11-13, keep its complete printed designation, hardware revision and project context together so that purchasing and engineering review the same component.
Technical identification and selection data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | AF116-30-11-13 |
| Product family | AF116 |
| Component role | three-pole AF motor contactor |
| Main poles | 3 |
| Rated operational current | 116 A AC-3 family designation; verify duty and voltage |
| Control supply | 100 to 250 V AC/DC |
| Built-in auxiliary | 1 NO + 1 NC |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The AF116-30-11-13 data above identifies the published function and key selection checks. A rating or connection shared with another device does not establish an approved replacement for AF116-30-11-13.
Match the interface before ordering
The critical cross-check for AF116-30-11-13 is: Compare coil supply, auxiliary feedback, contactor coordination, conductor termination and motor current. A similar product outline, series name or current class alone is not enough.
Ask the supplier to identify any deviations from AF116-30-11-13 in connection hardware, function, approvals and accessories. Resolve them against the engineering drawing before accepting a substitute.
Installation and return-to-service proof
For AF116-30-11-13, the controlled acceptance method is: Check energization, dropout, interlock feedback and load run after wiring verification. Record the actual results, not merely a pass/fail impression.
Before returning the equipment containing AF116-30-11-13 to production, verify isolation, protective coordination, terminal identification and any interlock or safety-related response.
Where this item works
For AF116-30-11-13, the intended duty is: Switch a motor feeder or compatible industrial load under the approved starter design. Capture the actual connected load or signal, site environment and operating sequence before purchase.
The installation record for AF116-30-11-13 should include a nameplate photograph, panel drawing and the failed unit's setting or software version when applicable.
Same-series ordering references
These codes share the AF116 grouping with AF116-30-11-13, but option strings can alter ratings, wiring, firmware or certifications. They are not automatically interchangeable with AF116-30-11-13.
- AF116-30-11-13 100-250VAC
Buyer handover record
Quote AF116-30-11-13 in full, state quantity and destination, and attach the relevant panel photograph and drawing. Confirm whether accessories are included in the offered supply.
At receipt, compare the supplied label with AF116-30-11-13 and document any difference before installation. Retain the final part identity and the AF116-30-11-13 acceptance test with the asset history.
