Asset and application profile: ABB ACS880-14-505A-3
ABB ACS880-14-505A-3 is identified here by its complete designation. This page helps align the requested item with its site duty, interfaces and commissioning evidence; a family label alone is insufficient for substitution.
Technical data and configuration boundaries
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | ACS880-14-505A-3 |
| Product family | ACS880-14 |
| Component role | regenerative single drive module |
| Function | Regenerative single drive module |
| Voltage class | 400 V IEC |
| Output rating | 505 A reference |
| Motor power | 250 kW IEC reference |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Treat the figures and descriptions for ACS880-14-505A-3 as verified selection references, then check the specific unit nameplate, official drawing and ordered options before installation.
Where this item fits
The practical purpose of ACS880-14-505A-3 is to return braking energy through the engineered regenerative drive system. Identify the plant tag, controlled equipment and operating condition so the request describes a real application rather than a generic spare.
For ACS880-14-505A-3, record whether the work is a planned replacement, a new installation or an emergency stock replenishment. Each route changes the evidence needed before release.
Interface comparison
Before accepting ACS880-14-505A-3, compare supply quality, cabinet protection, LCL filtering, cooling and motor application. A difference in an apparently minor suffix can change the installation or communication behavior.
Photograph the existing ACS880-14-505A-3 nameplate and connections when possible. Keep the comparison with the work order, including any required adapter or accessory.
Proof of operation
For the ACS880-14-505A-3 handover, test power flow in motoring and braking modes. Document readings, operator observations and any exceptions before normal service is restored.
Archive the final ACS880-14-505A-3 configuration, software or hardware revision and acceptance sign-off so future maintenance has a trustworthy baseline.
Risk and installation controls
An installation involving ACS880-14-505A-3 should follow the site isolation and permit process. Preserve the approved settings, drawings and test records before removing the old device.
Fit ACS880-14-505A-3 only after the mechanical, electrical and environmental boundaries are understood. Check protective devices and termination torque against the applicable ABB instructions.
Other designations in this family
The following ACS880-14 codes are grouped for search and enquiry with ABB ACS880-14-505A-3. They may have different ratings, firmware, approvals or accessories and are not automatically interchangeable.
No additional unassigned ACS880-14 code is grouped under ACS880-14-505A-3 at present.
Order and service handoff
State the exact ABB ACS880-14-505A-3 code, plant tag, critical ratings and required documentation on the enquiry. Request confirmation of revision and accessory scope before dispatch.
On receipt, compare ACS880-14-505A-3 against the approved request and hold any mismatch for engineering review. Keep the tested configuration with the asset record.
