ACS380-03E-15A6-4 drive selection for compact machine control
The ABB ACS380-03E-15A6-4 is a compact machinery-drive designation in the three-phase 380–480 V class. The type string identifies a 15.6 A frame variant; actual usable motor power depends on ABB’s duty table, ambient conditions, overload profile and supply voltage. The complete code should be retained for a replacement or quotation check.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Type designation | ACS380-03E-15A6-4 |
| Supply class | Three-phase 380–480 V AC family |
| Rated output current | 15.6 A designation |
| Drive family | ABB ACS380 machinery drive |
| Construction | Compact drive module; confirm frame and mounting variant |
| Application | Machine-level speed and torque control |
| Exact output power | Use the matching ABB duty table for load and supply conditions |
The table summarizes family or catalog values for identification and initial selection. Confirm the nameplate, environmental limits, standards, revision and options for the exact device before procurement or engineering approval.
Application and system selection
ACS380 selection is normally tied to a machine package where predictable torque, repeatable acceleration and integration with the machine controller matter. Check the motor current over the complete speed range, low-speed cooling, starts per hour, dynamic braking and any safety function required by the machine risk assessment. Confirm that the control architecture supports the selected I/O and communication options.
Configuration and compatibility
Compare the device nameplate with the project drawing and the selected frame. Confirm input voltage, motor cable length, EMC category, control panel, fieldbus adapter and safety options. The current rating alone does not establish equivalence with another ACS380 code or another drive family; review derating, overload duty and short-circuit coordination.
Related models and order-code references
The following designations are related catalog references, not automatic substitutes. Check each complete code, rating, connection, revision and application requirement before selecting a variant.
- ACS380-040C-03A3-4+K475
- ACS380-040C-04A0-4+L538
- ACS380-040C-05A6-4
- ACS380-040C-09A4-4+L538
- ACS380-040C-17A0-4+L538
- ACS380-040N-09A4-4
- ACS380-040S-032A-4
- ACS380-040S-038A-4
- ACS380-040S-05A6-4
- ACS380-040S-07A2-4
- ACS380-040S-09A4-4
- ACS380-040S-12A6-4
- ACS380-040S-25A0-4
- ACS380-040x-05A6-4 R1
- ACS380-042S-02A6-4
- ACS380-042S-04A0-4
Installation and commissioning
Install with the prescribed orientation, heat-dissipation space and protective-device coordination. Verify grounding, shield termination and separation of power and signal cables. Commission with the motor isolated from hazardous machine motion where possible; check motor data, direction, limits, ramp profile, interlocks and communication diagnostics before the production test.
Replacement and procurement information
For a quotation or replacement review, provide the complete designation ACS380-03E-15A6-4, the order code where applicable, serial or hardware revision, quantity, operating environment, connected equipment and required delivery date. Include a legible nameplate image and relevant wiring, loop or switchgear drawing so the exact interface and configuration can be checked.
Ask the supplier to confirm accessories, revision compatibility and any approved successor in writing. Do not select solely from a family name or product photograph. Follow the current ABB installation and safety instructions for the exact unit.
