ABB 8BVF0220H000.000-1 — field checks for ACOPOSmulti 8BVF line filters
ABB 8BVF0220H000.000-1 is a representative reference within ACOPOSmulti 8BVF line filters. This page is organized around a maintenance decision: identify the installed duty, compare the complete part, then prove the function. Order-code options must be checked against the marked unit and the project record.
Technical identity and parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 8BVF0220H000.000-1 |
| Product family | ACOPOSmulti 8BVF line filters |
| Component role | ACOPOSmulti supply line filter |
| Exact ABB order reference | 8bvf0220h000.000-1 |
| ABB product series | ACOPOSmulti 8BVF line filters |
| Type | 8BVF0220H000.000-1 |
| Family role | ACOPOSmulti line filtering |
| Companion | B&R documentation assigns a compatible 8BVP supply module |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The verified family facts above help identify ABB 8BVF0220H000.000-1. Values that depend on a suffix, installed accessory, approval or application are deliberately left for nameplate and manual confirmation.
02 · Identity match
Compare ABB 8BVF0220H000.000-1 against the physical label, not a shortened family name. Confirm supply-module pairing, voltage, current and EMC wiring. Check the complete suffix, revision and any special options or approvals.
If an ABB 8BVF0220H000.000-1 alternative is proposed, document each difference in supply, terminals, materials, mechanical fit or software. A related listing below is a browsing aid, never automatic interchangeability.
01 · Duty at the installed point
ABB 8BVF0220H000.000-1 is selected to filter the specified ACOPOSmulti supply interface. Record the equipment tag, actual process or circuit duty and the consequence of loss of function. A component that looks similar may serve a different duty in the same cabinet or process area.
For ABB 8BVF0220H000.000-1, start with the original schematic, loop sheet or bill of materials. This fixes the location and the function before a replacement is evaluated.
04 · Receiving inspection
At receipt, compare ABB 8BVF0220H000.000-1 packaging and marking with the approved order. Inspect seals, housings, terminals, connectors and any supplied accessories. Quarantine damaged or ambiguous stock.
Keep the ABB 8BVF0220H000.000-1 delivery reference and revision with the equipment history. The shared category image on this site is illustrative and is not proof of the shipped variant.
03 · Interface review
Trace every connection to ABB 8BVF0220H000.000-1: power, signal, communication, process and protective earth as applicable. Check the mating equipment and access needed for safe service.
For ABB 8BVF0220H000.000-1, record the limits of the upstream and downstream system. Ratings quoted for a family do not replace the exact installation and derating checks.
05 · Controlled replacement
Install ABB 8BVF0220H000.000-1 only under the plant's isolation, permit and qualification procedure. Preserve the prior wiring and configuration record; install accessories required by the official instructions.
Before energizing ABB 8BVF0220H000.000-1, verify terminal mapping, mounting, grounding and all application-specific clearances. Do not use a visual match to waive these checks.
06 · Functional acceptance
After ABB 8BVF0220H000.000-1 is installed, inspect grounding and verify the approved supply arrangement. Test the connected function through the relevant operating states, not merely a power-on indicator.
Record the ABB 8BVF0220H000.000-1 test conditions and results, including any remaining restriction. A failed or unperformed acceptance step means the equipment is not yet released for service.
07 · Future spare decision
Retain the full ABB 8BVF0220H000.000-1 designation, data sheet revision, configured settings and acceptance result for the next maintenance cycle.
If another ABB 8BVF0220H000.000-1 code is offered later, repeat the identity and interface checks rather than assuming that a common series prefix establishes direct replacement.
Other codes within this concrete series
The following order references are grouped with ABB 8BVF0220H000.000-1 and will not be given separate product pages. They can have different ratings, functions or options. Confirm each complete designation before quotation or substitution.
- 8BVF0440H000.001-2
Release decision
Approve ABB 8BVF0220H000.000-1 only when its documented identity, installed duty and functional acceptance all agree.
Archive the final ABB 8BVF0220H000.000-1 record so future purchases can be assessed against verified evidence.
