Technical selection record for ABB 3BSE092691R1 CI868AK01
ABB 3BSE092691R1 CI868AK01 is the representative order reference for CI868AK01 IEC 61850 interfaces. This page separates verified catalog data from site-specific checks so buyers can specify the correct item for connect an AC 800M installation to IEC 61850.
Technical specification and configuration limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3BSE092691R1 CI868AK01 |
| Product family | CI868AK01 IEC 61850 interfaces |
| Component role | AC 800M IEC 61850 communication package |
| Exact ABB order reference | 3BSE092691R1 |
| ABB product series | CI868AK01 IEC 61850 interfaces |
| ABB type | CI868AK01 |
| Package | CI868A interface plus TP867 baseplate |
| Baseplate width | 60 mm |
| Compatibility | Verify 800xA and Control Builder versions |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table describes ABB 3BSE092691R1 CI868AK01, not every item in its wider series. Confirm the actual label and the current ABB product documentation for the unit being supplied.
Interface review
Before fitting ABB 3BSE092691R1 CI868AK01, compare the equipment drawing, terminal numbering, mounting space and connected load with the actual installed plant. Review the application-specific electrical or communications interface and any relevant software configuration.
Do not infer compatibility from a photograph of ABB 3BSE092691R1 CI868AK01. Mechanical fit, wiring, firmware, thermal conditions and protection coordination may all vary within a nominal series.
Use case and system boundary
The intended duty for ABB 3BSE092691R1 CI868AK01 is to connect an AC 800M installation to IEC 61850. Define the affected circuit, machine or network and record its normal and fault states. The product should be selected for that actual duty, not merely because the order code resembles an older spare.
For ABB 3BSE092691R1 CI868AK01, distinguish the functional device from its accessories and from other ratings in CI868AK01 IEC 61850 interfaces. A related catalog reference is a family-navigation aid, not an automatic substitute.
Purchasing specification
Request ABB 3BSE092691R1 CI868AK01 by complete designation. Add the required supply, current, interface, enclosure, revision and regulatory approvals to the purchase document. Any proposed alternative should be accompanied by a written difference check.
For ABB 3BSE092691R1 CI868AK01, check controller firmware, engineering software and network design. Confirm availability and lifecycle status with the supplier, especially when an older assembly or control platform is involved.
Installation and acceptance
Only qualified personnel should install ABB 3BSE092691R1 CI868AK01 under the approved isolation and safe-work procedure. After correct assembly, validate IEC 61850 data exchange. Test the function that the circuit or process actually relies on.
The commissioning record for ABB 3BSE092691R1 CI868AK01 should include settings, test conditions, observed responses, drawing revision and approval. If the result differs from expectation, resolve the cause before putting the asset back into service.
Receiving inspection
On arrival, identify ABB 3BSE092691R1 CI868AK01 from its nameplate, box and order paperwork. Inspect for damage, missing hardware and revision differences. Keep questionable material separate until the engineering team resolves the discrepancy.
Record the full ABB 3BSE092691R1 CI868AK01 designation against the asset or spare-part register. Preserve the manufacturer's instructions and any configuration record needed for later replacement.
Future maintenance
Store ABB 3BSE092691R1 CI868AK01 with a traceable part number and the configuration evidence. During future maintenance, compare the installed unit to the approved reference before any order is placed.
If ABB 3BSE092691R1 CI868AK01 is replaced with another member of CI868AK01 IEC 61850 interfaces, repeat the rating, interface and safety review. Similar family names do not prove equivalence.
Release decision
Approve ABB 3BSE092691R1 CI868AK01 only after the catalog identity, site interfaces and acceptance checks agree.
Keep the approved ABB 3BSE092691R1 CI868AK01 record available for the next repair or purchasing cycle.
