ABB 3BHB040806R0003 replacement evidence
ABB 3BHB040806R0003 is the documented medium-voltage drive upgrade kit in this service decision. Its role is to apply the specified ACS1000i upgrade. The category picture is a reference image, not proof of the exact ABB 3BHB040806R0003 supplied part.
ABB identity and technical selection data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3BHB040806R0003 |
| Product family | CVMI2B ACS1000i upgrade kits |
| Component role | medium-voltage drive upgrade kit |
| Exact ABB order reference | 3BHB040806R0003 |
| ABB product series | CVMI2B ACS1000i upgrade kits |
| ABB order code | 3BHB040806R0003 |
| ABB public designation | CVMI2B ACS1000I |
| ABB product description | CVMI2B ACS1000I; UPGRADE KIT |
| Service grouping | CVMI2B ACS1000i upgrade kits |
| Fit boundary | CVMI2B kit identity, ACS1000i revision and installation procedure |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table separates the ABB 3BHB040806R0003 manufacturer description from host-dependent decisions. Confirm any unstated voltage, connection, software or dimensional requirement against the installed equipment.
Replacement evidence in three checks
- Identify ABB 3BHB040806R0003 and the existing component marking.
- Confirm CVMI2B kit identity, ACS1000i revision and installation procedure for ABB 3BHB040806R0003.
- Record the acceptance method and responsible technician for ABB 3BHB040806R0003.
Part and revision comparison
Compare the full ABB 3BHB040806R0003 order code, marking and supplied pieces with the purchase request. Check CVMI2B kit identity, ACS1000i revision and installation procedure.
If ABB 3BHB040806R0003 is proposed as a substitute, obtain a documented compatibility decision before touching the energized system.
Installed position
Locate ABB 3BHB040806R0003 in the cabinet, drive or breaker assembly and record the host type and hardware revision. Similar-looking parts can occupy different electrical or mechanical positions.
For ABB 3BHB040806R0003, retain the as-found photo, connector labels and maintenance reference before removal.
Electrical safety boundary
Before handling ABB 3BHB040806R0003, apply the site's isolation, discharge, earthing and stored-energy procedure appropriate to the actual equipment. Medium-voltage assemblies require qualified personnel and approved test methods.
Do not infer the safe waiting time or permitted test voltage for ABB 3BHB040806R0003 from this product summary; use the installed-system instruction.
Settings and configuration
Where ABB 3BHB040806R0003 includes programmable or option hardware, retain a verified backup and compare the loaded parameters or firmware with the approved configuration.
For a passive ABB 3BHB040806R0003 part, instead document the relevant rating, position and circuit drawing without inventing software settings.
Mechanical and connection review
For ABB 3BHB040806R0003, inspect mounting geometry, connector keying, cable length and protective covers. Record any mismatch before installation.
Fit ABB 3BHB040806R0003 with the specified attachment hardware and preserve the designed airflow, insulation and clearance paths.
Proof after fitting
After installing ABB 3BHB040806R0003, prove the upgraded interface and drive startup. Use an authorized test plan that covers normal response and any relevant fault or inhibited state.
Record ABB 3BHB040806R0003 identity, measured results, alarm behavior and sign-off before returning the system to service.
Stock record
Keep ABB 3BHB040806R0003 in the spares register with its host, service position and the confirmed part description, not merely the broad ABB brand name.
A future ABB 3BHB040806R0003 order should quote the complete code and any revision or frame restriction established during this repair.
Acceptance handover
File the ABB 3BHB040806R0003 receiving and test records with the equipment history.
Use the full ABB 3BHB040806R0003 code for any later stock or warranty enquiry.
