Technical identity of ABB 3BHB021516R0001 in the installed assembly
ABB 3BHB021516R0001 is the documented medium-voltage earthing isolator in this service decision. Its role is to restore the specified earthing-isolator position. The category picture is a reference image, not proof of the exact ABB 3BHB021516R0001 supplied part.
ABB identity and technical selection data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3BHB021516R0001 |
| Product family | 6KV9 earthing-isolator assemblies |
| Component role | medium-voltage earthing isolator |
| Exact ABB order reference | 3BHB021516R0001 |
| ABB product series | 6KV9 earthing-isolator assemblies |
| ABB order code | 3BHB021516R0001 |
| ABB public designation | 6KV9 |
| ABB product description | 6KV9; EARTHING ISOLATOR |
| Service grouping | 6KV9 earthing-isolator assemblies |
| Fit boundary | 6KV9 assembly, interlocks and site grounding design |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table separates the ABB 3BHB021516R0001 manufacturer description from host-dependent decisions. Confirm any unstated voltage, connection, software or dimensional requirement against the installed equipment.
Replacement evidence in three checks
- Identify ABB 3BHB021516R0001 and the existing component marking.
- Confirm 6KV9 assembly, interlocks and site grounding design for ABB 3BHB021516R0001.
- Record the acceptance method and responsible technician for ABB 3BHB021516R0001.
Part and revision comparison
Compare the full ABB 3BHB021516R0001 order code, marking and supplied pieces with the purchase request. Check 6KV9 assembly, interlocks and site grounding design.
If ABB 3BHB021516R0001 is proposed as a substitute, obtain a documented compatibility decision before touching the energized system.
Installed position
Locate ABB 3BHB021516R0001 in the cabinet, drive or breaker assembly and record the host type and hardware revision. Similar-looking parts can occupy different electrical or mechanical positions.
For ABB 3BHB021516R0001, retain the as-found photo, connector labels and maintenance reference before removal.
Electrical safety boundary
Before handling ABB 3BHB021516R0001, apply the site's isolation, discharge, earthing and stored-energy procedure appropriate to the actual equipment. Medium-voltage assemblies require qualified personnel and approved test methods.
Do not infer the safe waiting time or permitted test voltage for ABB 3BHB021516R0001 from this product summary; use the installed-system instruction.
Settings and configuration
Where ABB 3BHB021516R0001 includes programmable or option hardware, retain a verified backup and compare the loaded parameters or firmware with the approved configuration.
For a passive ABB 3BHB021516R0001 part, instead document the relevant rating, position and circuit drawing without inventing software settings.
Mechanical and connection review
For ABB 3BHB021516R0001, inspect mounting geometry, connector keying, cable length and protective covers. Record any mismatch before installation.
Fit ABB 3BHB021516R0001 with the specified attachment hardware and preserve the designed airflow, insulation and clearance paths.
Proof after fitting
After installing ABB 3BHB021516R0001, prove mechanical interlock and earthing state. Use an authorized test plan that covers normal response and any relevant fault or inhibited state.
Record ABB 3BHB021516R0001 identity, measured results, alarm behavior and sign-off before returning the system to service.
Stock record
Keep ABB 3BHB021516R0001 in the spares register with its host, service position and the confirmed part description, not merely the broad ABB brand name.
A future ABB 3BHB021516R0001 order should quote the complete code and any revision or frame restriction established during this repair.
Acceptance handover
File the ABB 3BHB021516R0001 receiving and test records with the equipment history.
Use the full ABB 3BHB021516R0001 code for any later stock or warranty enquiry.
