Technical identity of ABB 3AXD50000010420 in the installed assembly
ABB 3AXD50000010420 is the documented shorting-plug component in this service decision. Its role is to fit the specified shorting-plug position. The category picture is a reference image, not proof of the exact ABB 3AXD50000010420 supplied part.
ABB identity and technical selection data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3AXD50000010420 |
| Product family | SAMTEC shorting-plug service parts |
| Component role | shorting-plug component |
| Exact ABB order reference | 3AXD50000010420 |
| ABB product series | SAMTEC shorting-plug service parts |
| ABB order code | 3AXD50000010420 |
| ABB public designation | SAMTEC SNT-100-BK-T-H |
| ABB product description | SAMTEC SNT-100-BK-T-H; SHORTING PLUG |
| Service grouping | SAMTEC shorting-plug service parts |
| Fit boundary | SAMTEC SNT-100-BK-T-H designation and host PCB location |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table separates the ABB 3AXD50000010420 manufacturer description from host-dependent decisions. Confirm any unstated voltage, connection, software or dimensional requirement against the installed equipment.
Replacement evidence in three checks
- Identify ABB 3AXD50000010420 and the existing component marking.
- Confirm SAMTEC SNT-100-BK-T-H designation and host PCB location for ABB 3AXD50000010420.
- Record the acceptance method and responsible technician for ABB 3AXD50000010420.
Part and revision comparison
Compare the full ABB 3AXD50000010420 order code, marking and supplied pieces with the purchase request. Check SAMTEC SNT-100-BK-T-H designation and host PCB location.
If ABB 3AXD50000010420 is proposed as a substitute, obtain a documented compatibility decision before touching the energized system.
Installed position
Locate ABB 3AXD50000010420 in the cabinet, drive or breaker assembly and record the host type and hardware revision. Similar-looking parts can occupy different electrical or mechanical positions.
For ABB 3AXD50000010420, retain the as-found photo, connector labels and maintenance reference before removal.
Electrical safety boundary
Before handling ABB 3AXD50000010420, apply the site's isolation, discharge, earthing and stored-energy procedure appropriate to the actual equipment. Medium-voltage assemblies require qualified personnel and approved test methods.
Do not infer the safe waiting time or permitted test voltage for ABB 3AXD50000010420 from this product summary; use the installed-system instruction.
Settings and configuration
Where ABB 3AXD50000010420 includes programmable or option hardware, retain a verified backup and compare the loaded parameters or firmware with the approved configuration.
For a passive ABB 3AXD50000010420 part, instead document the relevant rating, position and circuit drawing without inventing software settings.
Mechanical and connection review
For ABB 3AXD50000010420, inspect mounting geometry, connector keying, cable length and protective covers. Record any mismatch before installation.
Fit ABB 3AXD50000010420 with the specified attachment hardware and preserve the designed airflow, insulation and clearance paths.
Proof after fitting
After installing ABB 3AXD50000010420, inspect insertion, contact orientation and circuit state. Use an authorized test plan that covers normal response and any relevant fault or inhibited state.
Record ABB 3AXD50000010420 identity, measured results, alarm behavior and sign-off before returning the system to service.
Stock record
Keep ABB 3AXD50000010420 in the spares register with its host, service position and the confirmed part description, not merely the broad ABB brand name.
A future ABB 3AXD50000010420 order should quote the complete code and any revision or frame restriction established during this repair.
Acceptance handover
File the ABB 3AXD50000010420 receiving and test records with the equipment history.
Use the full ABB 3AXD50000010420 code for any later stock or warranty enquiry.
