Identifying ABB 3AUA0000120002 for the installed system
ABB 3AUA0000120002 identifies a input-bridge module kit for a specific service position. The goal is to restore the specified ACS880 input bridge. The shared category image is illustrative, so verify the received ABB 3AUA0000120002 against the actual marking and host manual.
Verified part identity and technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3AUA0000120002 |
| Product family | ACS880 R8/R9 input thyristor-diode kits |
| Component role | input-bridge module kit |
| Exact ABB order reference | 3AUA0000120002 |
| ABB product series | ACS880 R8/R9 input thyristor-diode kits |
| ABB order code | 3AUA0000120002 |
| Manufacturer designation | ACS880 R8 INPUT SP KIT (3PCS) |
| ABB description | ACS880 R8 INPUT SP KIT (3PCS); THYRISTOR/DIODE MODULE KIT |
| R8 package | Three-piece input spare kit in ABB description |
| R9 version | Separate three-piece ABB order code |
| Variant reference | 3AUA0000120622: ACS880 R9 INPUT SP KIT (3 PCS); THYRISTOR/DIODE MODULE KIT |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB 3AUA0000120002 values above come from the named manufacturer description. Where a rating, interface or compatible host is not stated, it must be checked on the installed equipment rather than assumed from a nearby model.
Purchase decision
- Quote the complete ABB 3AUA0000120002 code in the request.
- For ABB 3AUA0000120002, confirm R8 versus R9 frame, supplied pieces and bridge wiring.
- Hold ABB 3AUA0000120002 for clarification if marking, supplied parts or host differ.
Evidence from the installed unit
Record the ABB 3AUA0000120002 host label, as-found part marking, connections and any relevant software or parameter backup. Keep the drawing revision beside this evidence.
If ABB 3AUA0000120002 is a replacement, compare old and new connector keying, rating text and supplied kit contents before removing the old part.
What the part changes
ABB 3AUA0000120002 is selected for the documented circuit or maintenance role. Identify the assembly position, system version and expected function before procurement.
A family name alone does not establish that ABB 3AUA0000120002 can replace a neighboring control board, fan, capacitor or power module.
Work authorization and isolation
Qualified personnel must isolate ABB 3AUA0000120002 and the surrounding equipment in accordance with the applicable ABB and site safety instructions. Verify stored energy, DC-link discharge and earthing where relevant.
This ABB 3AUA0000120002 page does not define a universal safe waiting time or substitute for the equipment-specific maintenance manual.
Receiving and stock control
At receipt, compare ABB 3AUA0000120002, package quantity and physical condition with the purchase order. Segregate mismatched or damaged parts.
Keep ABB 3AUA0000120002 indexed by the complete code, confirmed host and service position so that later purchases do not rely on a shortened family label.
Fitting the correct version
Check R8 versus R9 frame, supplied pieces and bridge wiring for ABB 3AUA0000120002. Confirm orientation, mounting, protective barriers, cable routing and cooling path before energization.
Where ABB 3AUA0000120002 has a programmed or frame-specific variant, match that version explicitly rather than using a visual fit as approval.
Commissioning proof
After ABB 3AUA0000120002 is installed, test input charging and protection response. Observe relevant alarms, feedback and inhibited states under an approved test plan.
Save the ABB 3AUA0000120002 test conditions and outcome with the equipment record; a successful power-up alone is not full acceptance.
Future replacement note
When ABB 3AUA0000120002 is used again, recheck the current host documentation and any revised part or firmware before approving substitution.
Retain the ABB 3AUA0000120002 acceptance result, installed serial information and revision-specific restrictions for maintenance planning.
ABB variants represented on this page
The following codes share the ABB 3AUA0000120002 service family and are not being given separate product pages. Their rating, frame, supplied parts or programmed state may differ; do not assume interchangeability with ABB 3AUA0000120002.
- 3AUA0000120622
Service handover
Keep the ABB 3AUA0000120002 selection and test records with the maintenance job.
Use ABB 3AUA0000120002 as the full order-code keyword in future enquiries.
