Field record for ABB 3AUA0000112490 and its host
ABB 3AUA0000112490 names the exact drive printed-circuit board used in this service profile. Its job is to restore the documented BGAD board position. The category image is a reference image, not proof that the delivered ABB 3AUA0000112490 has the same physical configuration.
Technical data for the order code
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3AUA0000112490 |
| Product family | BGAD-11C drive PCB spares |
| Component role | drive printed-circuit board |
| Exact ABB order reference | 3AUA0000112490 |
| ABB product series | BGAD-11C drive PCB spares |
| ABB order code | 3AUA0000112490 |
| Manufacturer designation | 3AUA0000112490 |
| Manufacturer product text | BGAD-11C; PCB |
| Board | BGAD-11C |
| ABB type | PCB |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Read the ABB 3AUA0000112490 designation alongside the installed-equipment documentation. A difference in host, frame, connector, rating or kit contents can change whether ABB 3AUA0000112490 is suitable.
Compare the supply item
Compare the delivered ABB 3AUA0000112490 label and package with the approved order. Check host drive, board revision and connector map before work begins.
If another ABB 3AUA0000112490 configuration is proposed, have the design owner review its technical identity; similarity of appearance does not establish equivalence.
Record the current assembly
Find the existing ABB 3AUA0000112490 position on the drawing and take a legible photograph of the installed marking. Record the host model, serial or frame identifier and revision.
For ABB 3AUA0000112490, capture the wiring, mounting orientation and any parameter image before removing the existing component.
Plan the isolation
Before handling ABB 3AUA0000112490, identify every relevant electrical and mechanical energy source. Apply the approved lockout and stored-energy discharge procedure.
Keep ABB 3AUA0000112490 installation instructions available at the work point. Observe the host manufacturer's limits for connection, torque, clearance and protective covers.
Functional evidence
With the assembly made safe for an authorized test, verify all assigned board signals. Include the relevant alternate state or alarm condition for ABB 3AUA0000112490.
Record the ABB 3AUA0000112490 test steps, observed results and any deviations. Do not close the maintenance record on an unverified function.
Fit and inspect
Install ABB 3AUA0000112490 in the documented location without forcing plugs, shafts or terminals. Check that labels remain readable and routing matches the original drawing.
Inspect ABB 3AUA0000112490 fasteners, strain relief, insulation, barriers and intended movement as relevant to this specific component.
Return-to-service decision
Compare ABB 3AUA0000112490 behavior against the approved acceptance criteria. Review protection, cooling, communication or relay response as appropriate to the role.
Only return equipment to service when ABB 3AUA0000112490 identification, installation and functional results have been signed off.
Keep the spare record usable
Store the complete ABB 3AUA0000112490 order code with the supported host and the tested configuration. Keep replacement and commissioning records with the asset.
When requesting ABB 3AUA0000112490 again, include the full designation and known variant restrictions rather than a short family label.
Service handover
State the accepted ABB 3AUA0000112490 code in the final maintenance and procurement record.
Retain the ABB 3AUA0000112490 test evidence for the next service intervention.
