ABB 3AUA0000080807 replacement profile
ABB 3AUA0000080807 identifies a DC-link capacitor spare for a specific service position. The goal is to replace the specified G1/G2 DC-link capacitor. The shared category image is illustrative, so verify the received ABB 3AUA0000080807 against the actual marking and host manual.
Verified part identity and technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3AUA0000080807 |
| Product family | RYE G1/G2 DC-capacitor spares |
| Component role | DC-link capacitor spare |
| Exact ABB order reference | 3AUA0000080807 |
| ABB product series | RYE G1/G2 DC-capacitor spares |
| ABB order code | 3AUA0000080807 |
| Manufacturer designation | RYE G1/G2, B43584X0007M |
| ABB description | RYE G1/G2, B43584X0007M; DC CAPACITOR |
| ABB descriptor | RYE G1/G2, B43584X0007M |
| Construction | DC capacitor per ABB description |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB 3AUA0000080807 values above come from the named manufacturer description. Where a rating, interface or compatible host is not stated, it must be checked on the installed equipment rather than assumed from a nearby model.
Purchase decision
- Quote the complete ABB 3AUA0000080807 code in the request.
- For ABB 3AUA0000080807, confirm G1/G2 host, capacitor marking and mechanical connections.
- Hold ABB 3AUA0000080807 for clarification if marking, supplied parts or host differ.
What the part changes
ABB 3AUA0000080807 is selected for the documented circuit or maintenance role. Identify the assembly position, system version and expected function before procurement.
A family name alone does not establish that ABB 3AUA0000080807 can replace a neighboring control board, fan, capacitor or power module.
Work authorization and isolation
Qualified personnel must isolate ABB 3AUA0000080807 and the surrounding equipment in accordance with the applicable ABB and site safety instructions. Verify stored energy, DC-link discharge and earthing where relevant.
This ABB 3AUA0000080807 page does not define a universal safe waiting time or substitute for the equipment-specific maintenance manual.
Evidence from the installed unit
Record the ABB 3AUA0000080807 host label, as-found part marking, connections and any relevant software or parameter backup. Keep the drawing revision beside this evidence.
If ABB 3AUA0000080807 is a replacement, compare old and new connector keying, rating text and supplied kit contents before removing the old part.
Fitting the correct version
Check G1/G2 host, capacitor marking and mechanical connections for ABB 3AUA0000080807. Confirm orientation, mounting, protective barriers, cable routing and cooling path before energization.
Where ABB 3AUA0000080807 has a programmed or frame-specific variant, match that version explicitly rather than using a visual fit as approval.
Receiving and stock control
At receipt, compare ABB 3AUA0000080807, package quantity and physical condition with the purchase order. Segregate mismatched or damaged parts.
Keep ABB 3AUA0000080807 indexed by the complete code, confirmed host and service position so that later purchases do not rely on a shortened family label.
Commissioning proof
After ABB 3AUA0000080807 is installed, verify discharge, polarity and charging sequence. Observe relevant alarms, feedback and inhibited states under an approved test plan.
Save the ABB 3AUA0000080807 test conditions and outcome with the equipment record; a successful power-up alone is not full acceptance.
Future replacement note
When ABB 3AUA0000080807 is used again, recheck the current host documentation and any revised part or firmware before approving substitution.
Retain the ABB 3AUA0000080807 acceptance result, installed serial information and revision-specific restrictions for maintenance planning.
Service handover
Keep the ABB 3AUA0000080807 selection and test records with the maintenance job.
Use ABB 3AUA0000080807 as the full order-code keyword in future enquiries.
