Configuration guide for ABB 2CSM207203R0801 TM-C 160/115-230
ABB 2CSM207203R0801 TM-C 160/115-230 is the representative purchasing reference for TM-C single-phase control transformers. Start by checking the installed duty and full designation. A code grouped on this page may have a different rating or function and is not automatically interchangeable.
Verified technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 2CSM207203R0801 TM-C 160/115-230 |
| Product family | TM-C single-phase control transformers |
| Component role | 160 VA control-circuit transformer |
| Exact ABB order reference | 2CSM207203R0801 |
| ABB product series | TM-C single-phase control transformers |
| ABB type | TM-C 160/115-230 |
| Rated power | 160 VA |
| Primary | 230–400 V AC |
| Secondary | 115–230 V AC |
| Frequency | 50/60 Hz |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
For ABB 2CSM207203R0801 TM-C 160/115-230, the table identifies facts supported by ABB technical material. Confirm all selectable ratings, approvals and order suffixes against the physical unit before release.
01 | What the item does
ABB 2CSM207203R0801 TM-C 160/115-230 is specified to supply a designed control or signalling circuit. Capture the asset tag and the actual connected circuit or process before asking for a quotation.
The operating role of ABB 2CSM207203R0801 TM-C 160/115-230 should be cross-checked with the drawing and functional description; appearance alone is not sufficient.
03 | Adjacent equipment
Map the upstream supply and the downstream equipment served by ABB 2CSM207203R0801 TM-C 160/115-230. Review connectors, terminals, panel access, protective earth and accessories as applicable.
ABB 2CSM207203R0801 TM-C 160/115-230 must fit the complete installation, not just one published nominal value. Ask the responsible engineer to resolve every interface discrepancy.
02 | Exact-match questions
Before ordering ABB 2CSM207203R0801 TM-C 160/115-230, compare tapped voltage, VA burden, fuse and enclosure temperature. Preserve the whole designation, including spaces, suffixes and revision information.
When another ABB 2CSM207203R0801 TM-C 160/115-230 family code is offered, record every changed contact, voltage, mounting, communication or material condition.
05 | Receipt and storage
Inspect ABB 2CSM207203R0801 TM-C 160/115-230 on arrival for marking, damaged terminals, broken seals and missing companions. Hold ambiguous stock until the engineering owner confirms it.
If ABB 2CSM207203R0801 TM-C 160/115-230 needs controlled storage, retain its protective packaging and follow the manufacturer's environmental instructions.
04 | Commercial check
Request ABB 2CSM207203R0801 TM-C 160/115-230 with its complete part string, quantity, approved condition and required documentation. Ask the supplier to identify any supersession separately.
Keep the ABB 2CSM207203R0801 TM-C 160/115-230 quote, label image and manufacturer data together so the receiving team can compare like with like.
07 | Acceptance evidence
After fitting ABB 2CSM207203R0801 TM-C 160/115-230, measure secondary voltage under approved load. Test the full connected function through normal and fault-relevant states as the site procedure requires.
Document the ABB 2CSM207203R0801 TM-C 160/115-230 results, as-left configuration and reviewer; an untested replacement should not be released for service.
06 | Installation boundary
Service work on ABB 2CSM207203R0801 TM-C 160/115-230 requires the site's isolation, permit and qualification procedures. Record the prior wiring and settings before disturbing the old item.
Fit ABB 2CSM207203R0801 TM-C 160/115-230 only with the specified mounting hardware and accessories. Do not infer a safe connection from similar catalog photographs.
08 | Future replacement
Archive ABB 2CSM207203R0801 TM-C 160/115-230 with the drawing revision, manufacturer document and test record. This keeps later stock decisions tied to the actual installation.
Re-evaluate any future ABB 2CSM207203R0801 TM-C 160/115-230 variant against that record instead of assuming that a common series name guarantees compatibility.
Release checklist
Release ABB 2CSM207203R0801 TM-C 160/115-230 only after identity, application, fit and acceptance evidence agree.
Retain the ABB 2CSM207203R0801 TM-C 160/115-230 decision record for the next procurement and maintenance cycle.
