ABB 2CKA001085A1622 1085-0-1622 component specification
ABB 2CKA001085A1622 1085-0-1622 is the full order identity for this neon-indicator switch component. It serves 2601/6 SKW-54 neon-lens switches and is intended to restore the specified illuminated wall-switch function. The category image is a reference view only; the delivered ABB 2CKA001085A1622 1085-0-1622 label, hardware and host documentation determine the exact configuration.
Manufacturer data and field limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 2CKA001085A1622 1085-0-1622 |
| Product family | 2601/6 SKW-54 neon-lens switches |
| Component role | neon-indicator switch component |
| Exact ABB order reference | 2cka001085a1622 1085-0-1622 |
| ABB product series | 2601/6 SKW-54 neon-lens switches |
| ABB order code | 2CKA001085A1622 1085-0-1622 |
| Official designation | 2601/6 SKW-54 |
| Manufacturer description | With red neon lens. With neon lamp. With N terminal. 2601/6 SKW-54 |
| Series boundary | 2601/6 SKW-54 neon-lens switches |
| Selection checkpoint | red neon lens, neutral terminal and matching mounting assembly |
| Installation note | ABB describes a neon lamp and N terminal; confirm the installed wiring. |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
For ABB 2CKA001085A1622 1085-0-1622, distinguish the official manufacturer description from checks required at the installation. A source that identifies only a spare-part type does not establish its voltage, current, dimensions or approvals for every host; confirm those on the marked item and the relevant equipment manual.
Product boundary
Use ABB 2CKA001085A1622 1085-0-1622 only in the assembly position for which it was specified. Note the plant equipment tag, approved drawing number and the removed component's complete designation.
A name that resembles ABB 2CKA001085A1622 1085-0-1622 does not make another part compatible. The decisive comparison is red neon lens, neutral terminal and matching mounting assembly, and differences should be referred to the responsible engineer.
Interface map
Trace where ABB 2CKA001085A1622 1085-0-1622 connects electrically and mechanically. Compare terminals, fasteners, connector keys, clearances and protective coordination with the current equipment drawing.
ABB describes a neon lamp and N terminal; confirm the installed wiring. Capture any software, control-voltage or environmental requirement affecting ABB 2CKA001085A1622 1085-0-1622 before releasing work.
Procurement evidence
Record ABB 2CKA001085A1622 1085-0-1622 exactly on the enquiry and purchase order, along with the host equipment, quantity and required accessories. Check whether the official product text describes a finished item, subassembly or kit.
For ABB 2CKA001085A1622 1085-0-1622, ask the supplier to confirm the marked delivered version. Packaging photographs and a category image are useful for orientation but cannot replace the complete order code.
Commissioning evidence
Install ABB 2CKA001085A1622 1085-0-1622 to the approved drawing and then verify indicator and switching behavior. Record observed behavior, settings and measured values that the site procedure requires.
For ABB 2CKA001085A1622 1085-0-1622, include both normal operation and a relevant alarm, isolated or alternate state. A successful power-on indication by itself does not prove the full function.
Pre-installation hold point
Before installing ABB 2CKA001085A1622 1085-0-1622, apply the authorized lockout, isolation and stored-energy procedure. Qualified personnel should review the host manual and site-specific hazards.
Inspect ABB 2CKA001085A1622 1085-0-1622 for damage, revision differences and missing accessories. A mismatch should remain on hold until it is resolved; do not force a mechanical fit or bypass an interlock.
Service continuity
Retain the ABB 2CKA001085A1622 1085-0-1622 code, delivery information, equipment tag and acceptance record together. This supports a future replacement without guessing from appearance.
When ABB 2CKA001085A1622 1085-0-1622 is ordered again, include the verified host version and any matched companion parts. Keep evidence of a formally approved substitution separate from ordinary related-model references.
Variant decision
The 2601/6 SKW-54 neon-lens switches family can contain size, voltage, pole-count or connector variants. ABB 2CKA001085A1622 1085-0-1622 is the representative code for this page, not a universal substitute for every variant.
Compare each related ABB 2CKA001085A1622 1085-0-1622 family code with its own official designation. Functional or physical differences can make two similar codes unsuitable for the same position.
Final identification
Use ABB 2CKA001085A1622 1085-0-1622 in full on the receiving and maintenance record.
Archive the ABB 2CKA001085A1622 1085-0-1622 installation and functional result with the equipment history.
