ABB 2CDL220001R1058, PS 2/58 Busbar application and technical review
ABB 2CDL220001R1058, PS 2/58 Busbar is the representative order reference for PS phase busbar system. This page separates verified catalog data from site-specific checks so buyers can specify the correct item for distribute power across compatible modular devices.
Technical specification and configuration limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 2CDL220001R1058, PS 2/58 Busbar |
| Product family | PS phase busbar system |
| Component role | two-phase pin busbar |
| Exact ABB order reference | 2CDL220001R1058 |
| ABB product series | PS phase busbar system |
| ABB type | PS2/58 |
| Order code | 2CDL220001R1058 |
| Phases | Two |
| Pins / copper section | 58 / 10 mm² |
| Related | PS-END end cap is a companion, not a busbar substitute |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table describes ABB 2CDL220001R1058, PS 2/58 Busbar, not every item in its wider series. Confirm the actual label and the current ABB product documentation for the unit being supplied.
Purchasing specification
Request ABB 2CDL220001R1058, PS 2/58 Busbar by complete designation. Add the required supply, current, interface, enclosure, revision and regulatory approvals to the purchase document. Any proposed alternative should be accompanied by a written difference check.
For ABB 2CDL220001R1058, PS 2/58 Busbar, check pin pitch, phase arrangement, device terminals and end caps. Confirm availability and lifecycle status with the supplier, especially when an older assembly or control platform is involved.
Use case and system boundary
The intended duty for ABB 2CDL220001R1058, PS 2/58 Busbar is to distribute power across compatible modular devices. Define the affected circuit, machine or network and record its normal and fault states. The product should be selected for that actual duty, not merely because the order code resembles an older spare.
For ABB 2CDL220001R1058, PS 2/58 Busbar, distinguish the functional device from its accessories and from other ratings in PS phase busbar system. A related catalog reference is a family-navigation aid, not an automatic substitute.
Receiving inspection
On arrival, identify ABB 2CDL220001R1058, PS 2/58 Busbar from its nameplate, box and order paperwork. Inspect for damage, missing hardware and revision differences. Keep questionable material separate until the engineering team resolves the discrepancy.
Record the full ABB 2CDL220001R1058, PS 2/58 Busbar designation against the asset or spare-part register. Preserve the manufacturer's instructions and any configuration record needed for later replacement.
Interface review
Before fitting ABB 2CDL220001R1058, PS 2/58 Busbar, compare the equipment drawing, terminal numbering, mounting space and connected load with the actual installed plant. Review the application-specific electrical or communications interface and any relevant software configuration.
Do not infer compatibility from a photograph of ABB 2CDL220001R1058, PS 2/58 Busbar. Mechanical fit, wiring, firmware, thermal conditions and protection coordination may all vary within a nominal series.
Installation and acceptance
Only qualified personnel should install ABB 2CDL220001R1058, PS 2/58 Busbar under the approved isolation and safe-work procedure. After correct assembly, inspect cut ends, covers and torque. Test the function that the circuit or process actually relies on.
The commissioning record for ABB 2CDL220001R1058, PS 2/58 Busbar should include settings, test conditions, observed responses, drawing revision and approval. If the result differs from expectation, resolve the cause before putting the asset back into service.
Future maintenance
Store ABB 2CDL220001R1058, PS 2/58 Busbar with a traceable part number and the configuration evidence. During future maintenance, compare the installed unit to the approved reference before any order is placed.
If ABB 2CDL220001R1058, PS 2/58 Busbar is replaced with another member of PS phase busbar system, repeat the rating, interface and safety review. Similar family names do not prove equivalence.
Related order references in this ABB series
The following references belong to the concrete PS phase busbar system range or a directly paired system for ABB 2CDL220001R1058, PS 2/58 Busbar. Ratings, function and host fit may differ. Each listed reference is covered here and will not receive a separate product page.
- 2CDL200001R0001, PS-END
Release decision
Approve ABB 2CDL220001R1058, PS 2/58 Busbar only after the catalog identity, site interfaces and acceptance checks agree.
Keep the approved ABB 2CDL220001R1058, PS 2/58 Busbar record available for the next repair or purchasing cycle.
