Configuration guide for ABB 2CDE142000R0301

ABB 2CDE142000R0301 is the representative purchasing reference for E260 electronic latching relays. Start by checking the installed duty and full designation. A code grouped on this page may have a different rating or function and is not automatically interchangeable.

Verified technical parameters

For ABB 2CDE142000R0301, the table identifies facts supported by ABB technical material. Confirm all selectable ratings, approvals and order suffixes against the physical unit before release.

01 | What the item does

ABB 2CDE142000R0301 is specified to switch a designed control circuit with a maintained relay state. Capture the asset tag and the actual connected circuit or process before asking for a quotation.

The operating role of ABB 2CDE142000R0301 should be cross-checked with the drawing and functional description; appearance alone is not sufficient.

02 | Exact-match questions

Before ordering ABB 2CDE142000R0301, compare coil voltage, contact arrangement and central-control requirement. Preserve the whole designation, including spaces, suffixes and revision information.

When another ABB 2CDE142000R0301 family code is offered, record every changed contact, voltage, mounting, communication or material condition.

03 | Adjacent equipment

Map the upstream supply and the downstream equipment served by ABB 2CDE142000R0301. Review connectors, terminals, panel access, protective earth and accessories as applicable.

ABB 2CDE142000R0301 must fit the complete installation, not just one published nominal value. Ask the responsible engineer to resolve every interface discrepancy.

04 | Commercial check

Request ABB 2CDE142000R0301 with its complete part string, quantity, approved condition and required documentation. Ask the supplier to identify any supersession separately.

Keep the ABB 2CDE142000R0301 quote, label image and manufacturer data together so the receiving team can compare like with like.

05 | Receipt and storage

Inspect ABB 2CDE142000R0301 on arrival for marking, damaged terminals, broken seals and missing companions. Hold ambiguous stock until the engineering owner confirms it.

If ABB 2CDE142000R0301 needs controlled storage, retain its protective packaging and follow the manufacturer's environmental instructions.

06 | Installation boundary

Service work on ABB 2CDE142000R0301 requires the site's isolation, permit and qualification procedures. Record the prior wiring and settings before disturbing the old item.

Fit ABB 2CDE142000R0301 only with the specified mounting hardware and accessories. Do not infer a safe connection from similar catalog photographs.

07 | Acceptance evidence

After fitting ABB 2CDE142000R0301, test local and central commands where fitted. Test the full connected function through normal and fault-relevant states as the site procedure requires.

Document the ABB 2CDE142000R0301 results, as-left configuration and reviewer; an untested replacement should not be released for service.

08 | Future replacement

Archive ABB 2CDE142000R0301 with the drawing revision, manufacturer document and test record. This keeps later stock decisions tied to the actual installation.

Re-evaluate any future ABB 2CDE142000R0301 variant against that record instead of assuming that a common series name guarantees compatibility.

Same-series codes grouped on this page

These ABB 2CDE142000R0301 related codes are covered here and will not get separate product pages. They may differ in rating, fit, controls or function; verify the exact designation before ordering or substitution.

• 2CDE142000R0311

Release checklist

Release ABB 2CDE142000R0301 only after identity, application, fit and acceptance evidence agree.

Retain the ABB 2CDE142000R0301 decision record for the next procurement and maintenance cycle.