Evaluating ABB 2CDE113001R1902 for the intended circuit
ABB 2CDE113001R1902 is the representative reference for the ISS16/3 series. Its decision starts with the intended duty: hold specified D01 fuse links in a modular panel. The technical values below identify this representative, not every series variant.
Technical reference for the representative
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 2CDE113001R1902 |
| Product family | ISS16/3 |
| Component role | three-pole E14 D01 fuse socket |
| Exact ABB order reference | 2CDE113001R1902 |
| ABB product series | ISS16/3 |
| ABB type | ISS16/3 |
| Fuse system | D01, E14 |
| Poles | Three |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Use the delivered ABB 2CDE113001R1902 marking and current manufacturer documentation to confirm all limits and options before engineering approval.
Decision 3 — document procurement boundaries
Quote ABB 2CDE113001R1902 with its complete designation and the approved series, function and application. Ask suppliers to identify every proposed change to current rating, options, firmware or accessories.
Keep ABB 2CDE113001R1902 separate from apparently similar products in another ABB series. Cross-series pairing requires explicit manufacturer compatibility evidence.
Decision 1 — identify the actual function
For ABB 2CDE113001R1902, document the existing device's job, connected circuit and expected behavior. The three-pole E14 D01 fuse socket description helps browsing, but does not prove interchangeability.
Check whether ABB 2CDE113001R1902 is a direct maintenance replacement or part of a revised design. Treat any changed function as an engineering decision.
Decision 2 — compare electrical and mechanical interfaces
Before specifying ABB 2CDE113001R1902, verify fuse size, pole arrangement and downstream load. Compare drawings and the real installation, including terminals, clearances, mounting and the relevant supply.
The ABB ISS16/3 family contains order references with possible differences. For ABB 2CDE113001R1902, a matching series name is insufficient without a full rating and connection check.
Decision 5 — commission and retain evidence
Install ABB 2CDE113001R1902 only under the approved isolation and commissioning procedure, then inspect seating and verify continuity after safe assembly. Record observed results against the design intent.
Store the ABB 2CDE113001R1902 test record with the asset tag, drawing revision and order history so a later technician can verify the exact configuration.
Decision 4 — receive and inspect
When ABB 2CDE113001R1902 arrives, compare the nameplate and order code with the purchase record. Check housing, connectors and supplied accessories for damage or omissions.
Place ABB 2CDE113001R1902 on hold if the delivered marking differs from the accepted specification. Resolve the difference before installation.
Decision 6 — plan a future replacement
A later replacement of ABB 2CDE113001R1902 must be checked again for series, interfaces, ratings and approvals. The related references below are useful for enquiry, not automatic substitutes.
If ABB 2CDE113001R1902 is unavailable, request a written comparison and repeat acceptance testing for any proposed alternate code.
Release criterion
Approve ABB 2CDE113001R1902 after the identity, duty, interface and site test all agree with the approved specification.
Keep ABB 2CDE113001R1902 and its exact order reference on the final equipment record; series grouping is for navigation and selection review.
