ABB 2CCS862001R0064 operating questions
This practical Q&A explains where ABB 2CCS862001R0064 fits, what must be checked and how to retain an auditable product selection.
Technical data for the exact order code
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 2CCS862001R0064 |
| Product family | S802S-C6 |
| Component role | two-pole high-performance miniature circuit breaker |
| Exact ABB order code | 2CCS862001R0064 |
| ABB catalog type | S802S-C6 |
| Poles | 2 |
| Representative current | 6 A |
| Breaking capacity | 50 kA Icu catalog table; check voltage |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
For ABB 2CCS862001R0064, confirm any version-dependent value from its ABB source and delivered marking before use.
What is the exact component?
ABB 2CCS862001R0064 is the full purchase identity for this two-pole high-performance miniature circuit breaker. Confirm the complete code on the delivered marking and the approved parts drawing.
The shared image for ABB 2CCS862001R0064 illustrates the product family only. It cannot confirm the precise current, contact, key, voltage or terminal configuration.
What does it connect to?
Trace ABB 2CCS862001R0064 into the rest of the assembly: power path, control supply, host breaker, socket, controller or terminal block as applicable. Record each mating part.
For ABB 2CCS862001R0064, inspect mounting clearance, wiring diagrams and permitted accessories. A visually similar version may connect differently.
When does this configuration fit?
Use ABB 2CCS862001R0064 where the designed task is to protect a high-fault-level two-pole feeder. Define both the normal state and the protective or off state before selection.
Check ABB 2CCS862001R0064 against prospective fault current and C-curve rating. Ratings and mechanical interfaces must match the installed circuit, not just the catalog family name.
How is acceptance demonstrated?
Commission ABB 2CCS862001R0064 using the equipment's approved procedure and qualified personnel. Test the commanded operation, return state and any alarm or safety signal.
Specifically for ABB 2CCS862001R0064, verify both poles and trip coordination. Keep the measured or observed result with the asset record.
What would a mismatch cause?
If ABB 2CCS862001R0064 has the wrong current, coil, curve, residual-current type or contact logic, the equipment may not behave as intended. Review the failure mode before substitution.
Do not treat a related ABB 2CCS862001R0064 family code as automatically interchangeable. Preserve the exact configuration and test evidence.
What goes on the purchase record?
Specify ABB 2CCS862001R0064 in full, with its ABB reference, required companions and any approved replacement decision. Review availability and lifecycle status for the order date.
A complete ABB 2CCS862001R0064 record prevents a later maintenance team from selecting a superficially similar variant with a different function.
Same-series order codes listed here
These ABB codes are related to ABB 2CCS862001R0064 and are covered on this page, not as separate products. Their ratings, electrical options and dimensions can differ.
- 2CCS862001R0104
- 2CCS862001R0164
- 2CCS862001R0324
- 2CCS862001R1255
Record the outcome
Accept ABB 2CCS862001R0064 only when exact identity, intended duty, companion parts and operating checks agree.
File the ABB 2CCS862001R0064 test outcome and manufacturer reference with the as-built documentation.
