ABB 1SVR405611R1000 operating questions
This practical Q&A explains where ABB 1SVR405611R1000 fits, what must be checked and how to retain an auditable product selection.
Technical data for the exact order code
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SVR405611R1000 |
| Product family | CR-M024DC2 |
| Component role | pluggable CR-M interface relay |
| Exact ABB order code | 1SVR405611R1000 |
| ABB catalog type | CR-M024DC2 |
| Coil | 24 V DC |
| Contacts | 2 changeover |
| Output rating | 250 V / 12 A catalog value |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
For ABB 1SVR405611R1000, confirm any version-dependent value from its ABB source and delivered marking before use.
What is the exact component?
ABB 1SVR405611R1000 is the full purchase identity for this pluggable CR-M interface relay. Confirm the complete code on the delivered marking and the approved parts drawing.
The shared image for ABB 1SVR405611R1000 illustrates the product family only. It cannot confirm the precise current, contact, key, voltage or terminal configuration.
How is acceptance demonstrated?
Commission ABB 1SVR405611R1000 using the equipment's approved procedure and qualified personnel. Test the commanded operation, return state and any alarm or safety signal.
Specifically for ABB 1SVR405611R1000, verify both changeover states. Keep the measured or observed result with the asset record.
When does this configuration fit?
Use ABB 1SVR405611R1000 where the designed task is to switch a control signal at higher contact rating. Define both the normal state and the protective or off state before selection.
Check ABB 1SVR405611R1000 against socket, DC coil polarity and load. Ratings and mechanical interfaces must match the installed circuit, not just the catalog family name.
What does it connect to?
Trace ABB 1SVR405611R1000 into the rest of the assembly: power path, control supply, host breaker, socket, controller or terminal block as applicable. Record each mating part.
For ABB 1SVR405611R1000, inspect mounting clearance, wiring diagrams and permitted accessories. A visually similar version may connect differently.
What would a mismatch cause?
If ABB 1SVR405611R1000 has the wrong current, coil, curve, residual-current type or contact logic, the equipment may not behave as intended. Review the failure mode before substitution.
Do not treat a related ABB 1SVR405611R1000 family code as automatically interchangeable. Preserve the exact configuration and test evidence.
What goes on the purchase record?
Specify ABB 1SVR405611R1000 in full, with its ABB reference, required companions and any approved replacement decision. Review availability and lifecycle status for the order date.
A complete ABB 1SVR405611R1000 record prevents a later maintenance team from selecting a superficially similar variant with a different function.
Same-series order codes listed here
These ABB codes are related to ABB 1SVR405611R1000 and are covered on this page, not as separate products. Their ratings, electrical options and dimensions can differ.
- 1SVR405611R1100
Record the outcome
Accept ABB 1SVR405611R1000 only when exact identity, intended duty, companion parts and operating checks agree.
File the ABB 1SVR405611R1000 test outcome and manufacturer reference with the as-built documentation.
