Checking ABB 1SFL451001R8000 against the actual assembly

ABB 1SFL451001R8000 identifies the three-phase contactor for this A110 three-phase contactor options selection. The intended work is to switch the specified three-phase load. The shared category image is a reference only; confirm the exact ABB 1SFL451001R8000 on the delivered part.

ABB technical data and ordering boundaries

The ABB 1SFL451001R8000 table records manufacturer-stated designations and the checks that depend on the installed host. An order-code family does not by itself establish a rating, approval or interchangeability.

Quick questions for the buyer

• Is the complete ABB 1SFL451001R8000 code on the purchase request?
• Has A110 coil voltage, 00/11 auxiliary contacts and coordination been confirmed for ABB 1SFL451001R8000?
• Who will verify ABB 1SFL451001R8000 after fitting and record the result?

What equipment is installed?

Locate ABB 1SFL451001R8000 in the actual breaker, panel or motor-control assembly. Record the frame or series, existing part marking, circuit drawing and revision.

If ABB 1SFL451001R8000 is a replacement, identify which visible difference is a rated option and which difference changes the host fit or function.

Which technical values matter?

For ABB 1SFL451001R8000, use the voltage, contact, pole, conductor or mounting details shown in the ABB designation only where explicitly stated. Compare those with the installed design.

Do not copy a neighboring version's rating into the ABB 1SFL451001R8000 purchase specification without its own ABB evidence.

What prevents a wrong substitute?

Check A110 coil voltage, 00/11 auxiliary contacts and coordination. For ABB 1SFL451001R8000, record any changed coil, contact, accessory position, supplied pieces or software status.

A visually similar ABB 1SFL451001R8000 option is not automatically interchangeable. Escalate a proposed alternative before purchase or installation.

How should the part be received?

Compare ABB 1SFL451001R8000, package label and quantity with the order. Inspect the device and supplied hardware for transport damage or mismatched pieces.

Keep ABB 1SFL451001R8000 in a held state until the full code, condition and host compatibility are accepted.

What should installation preserve?

Isolate all relevant energy before fitting ABB 1SFL451001R8000; follow the ABB host manual and site lockout rules. Preserve barriers, clearances, wiring and interlocks.

Record the original ABB 1SFL451001R8000 connection or mechanism position before removal, then verify the installed orientation and torque from the applicable instruction.

How is function proven?

After ABB 1SFL451001R8000 is fitted, verify pull-in, drop-out and all contact states. Include a normal command and the relevant inhibited, loss-of-supply or position state in the authorized test.

Archive ABB 1SFL451001R8000 as-left identification, settings where applicable, observed result and sign-off.

What goes into the next enquiry?

Store ABB 1SFL451001R8000 with the host asset number, complete designation and any approved variant restriction.

Future ABB 1SFL451001R8000 enquiries should use the complete order code and the verified installation record, not a shorthand family name.

Other codes in this ABB series

These ABB codes are grouped under ABB 1SFL451001R8000 and will not receive standalone pages. Different pole counts, voltages, action styles, frames or supplied pieces must still be checked for each complete code.

• 1SFL451001R8811

Handover note

Keep ABB 1SFL451001R8000 receiving and acceptance records with the equipment history.

Quote ABB 1SFL451001R8000 in full whenever the spare is reordered.