Technical selection record for ABB 1SFA899301R1007 PSPCB-CB-1
ABB 1SFA899301R1007 PSPCB-CB-1 is the representative order reference for PSPCB-CB PSTX control boards. This page separates verified catalog data from site-specific checks so buyers can specify the correct item for restore a correctly matched PSTX controller.
Technical specification and configuration limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SFA899301R1007 PSPCB-CB-1 |
| Product family | PSPCB-CB PSTX control boards |
| Component role | PSTX softstarter control-board spare |
| Exact ABB order reference | 1SFA899301R1007 |
| ABB product series | PSPCB-CB PSTX control boards |
| Representative | PSPCB-CB-1 |
| Host | PSTX30 to PSTX170 |
| Other boards | CB-2 for PSTX210–370; CB-3 for PSTX470–1250 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table describes ABB 1SFA899301R1007 PSPCB-CB-1, not every item in its wider series. Confirm the actual label and the current ABB product documentation for the unit being supplied.
Interface review
Before fitting ABB 1SFA899301R1007 PSPCB-CB-1, compare the equipment drawing, terminal numbering, mounting space and connected load with the actual installed plant. Review the application-specific electrical or communications interface and any relevant software configuration.
Do not infer compatibility from a photograph of ABB 1SFA899301R1007 PSPCB-CB-1. Mechanical fit, wiring, firmware, thermal conditions and protection coordination may all vary within a nominal series.
Use case and system boundary
The intended duty for ABB 1SFA899301R1007 PSPCB-CB-1 is to restore a correctly matched PSTX controller. Define the affected circuit, machine or network and record its normal and fault states. The product should be selected for that actual duty, not merely because the order code resembles an older spare.
For ABB 1SFA899301R1007 PSPCB-CB-1, distinguish the functional device from its accessories and from other ratings in PSPCB-CB PSTX control boards. A related catalog reference is a family-navigation aid, not an automatic substitute.
Purchasing specification
Request ABB 1SFA899301R1007 PSPCB-CB-1 by complete designation. Add the required supply, current, interface, enclosure, revision and regulatory approvals to the purchase document. Any proposed alternative should be accompanied by a written difference check.
For ABB 1SFA899301R1007 PSPCB-CB-1, check PSTX size, board revision and parameter backup. Confirm availability and lifecycle status with the supplier, especially when an older assembly or control platform is involved.
Installation and acceptance
Only qualified personnel should install ABB 1SFA899301R1007 PSPCB-CB-1 under the approved isolation and safe-work procedure. After correct assembly, restore settings and prove start/stop sequence. Test the function that the circuit or process actually relies on.
The commissioning record for ABB 1SFA899301R1007 PSPCB-CB-1 should include settings, test conditions, observed responses, drawing revision and approval. If the result differs from expectation, resolve the cause before putting the asset back into service.
Receiving inspection
On arrival, identify ABB 1SFA899301R1007 PSPCB-CB-1 from its nameplate, box and order paperwork. Inspect for damage, missing hardware and revision differences. Keep questionable material separate until the engineering team resolves the discrepancy.
Record the full ABB 1SFA899301R1007 PSPCB-CB-1 designation against the asset or spare-part register. Preserve the manufacturer's instructions and any configuration record needed for later replacement.
Future maintenance
Store ABB 1SFA899301R1007 PSPCB-CB-1 with a traceable part number and the configuration evidence. During future maintenance, compare the installed unit to the approved reference before any order is placed.
If ABB 1SFA899301R1007 PSPCB-CB-1 is replaced with another member of PSPCB-CB PSTX control boards, repeat the rating, interface and safety review. Similar family names do not prove equivalence.
Related order references in this ABB series
The following references belong to the concrete PSPCB-CB PSTX control boards range or a directly paired system for ABB 1SFA899301R1007 PSPCB-CB-1. Ratings, function and host fit may differ. Each listed reference is covered here and will not receive a separate product page.
- 1SFA899301R1008 PSPCB-CB-2
- 1SFA899301R1009 PSPCB-CB-3
Release decision
Approve ABB 1SFA899301R1007 PSPCB-CB-1 only after the catalog identity, site interfaces and acceptance checks agree.
Keep the approved ABB 1SFA899301R1007 PSPCB-CB-1 record available for the next repair or purchasing cycle.
