How ABB 1SFA619821R2001 fits the approved assembly
ABB 1SFA619821R2001 is the identified shrouded emergency-stop station for the CEPY1 compact emergency-stop stations application. The shared product-category image is a reference, not a photograph certifying the exact ABB 1SFA619821R2001 configuration.
The ABB 1SFA619821R2001 technical table separates manufacturer-stated identity from the installation checks that depend on the particular host device.
Key technical data and selection notes
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SFA619821R2001 |
| Product family | CEPY1 compact emergency-stop stations |
| Component role | shrouded emergency-stop station |
| Exact ABB order reference | 1SFA619821R2001 |
| ABB product series | CEPY1 compact emergency-stop stations |
| ABB order code | 1SFA619821R2001 |
| Manufacturer designation | CEPY1-2001 |
| Actuator | 40 mm mushroom button |
| Release | Twist release |
| Contacts | Two NC in ABB description |
| Mounting | Horizontal station |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
At-a-glance procurement checks
- Confirm the complete ABB 1SFA619821R2001 order code and package marking.
- Match ABB 1SFA619821R2001 to the host, drawings and approved accessory position.
- Record the required electrical or mechanical limits before fitting ABB 1SFA619821R2001.
Installed-system role
ABB 1SFA619821R2001 is intended to provide the specified emergency-stop command. Identify its place in the circuit before comparing visually similar accessories.
A manufacturer family prefix does not prove that ABB 1SFA619821R2001 has the same contact count, supply, pole arrangement or software interface as another listed option.
Compatibility evidence
For ABB 1SFA619821R2001, check safety-circuit design, two-NC wiring, station location and reset. Retain the host label, order code and drawing revision used for the decision.
If a substitute is proposed for ABB 1SFA619821R2001, require a documented comparison of every changed terminal, rating, supplied piece and approved host.
Receiving and storage
When ABB 1SFA619821R2001 arrives, compare the carton, device marking and purchase record. Inspect terminals, release mechanisms, molded parts and accessory contents as applicable.
Keep ABB 1SFA619821R2001 isolated from usable stock if its code or condition differs. Resolve the discrepancy before the scheduled shutdown.
Safe installation
Isolate and verify all applicable energy sources before installing ABB 1SFA619821R2001. Follow ABB and site requirements for lockout, stored energy and breaker operating springs.
Record wiring and orientation before removing the old unit. Install ABB 1SFA619821R2001 with the approved mounting and recheck protective covers and clearances.
Commissioning record
After installing ABB 1SFA619821R2001, validate the complete safety function under the approved procedure. Test normal operation and the relevant inhibited or fault state under an authorized procedure.
Archive ABB 1SFA619821R2001 as-left identity, settings, results and sign-off. An indicator or mechanical fit alone does not establish full circuit acceptance.
Future purchase boundary
Keep ABB 1SFA619821R2001 and its exact host in the maintenance register. Include any pole, voltage, feature or option restriction beside the stock record.
For later ABB 1SFA619821R2001 enquiries, use the full code and verified installation evidence rather than a shortened series name.
Procurement handover
State ABB 1SFA619821R2001, quantity and host equipment on the purchase request.
File the ABB 1SFA619821R2001 delivery identity and acceptance test in the equipment history.
