ABB 1SFA619210R1026 service handover and specification
ABB 1SFA619210R1026 is the representative identifier for C3SS compact selector switches. The procurement and maintenance notes below describe its documented role as a three-position compact selector, followed by the checks required before it is used at a real site.
Verified technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SFA619210R1026 |
| Product family | C3SS compact selector switches |
| Component role | three-position compact selector |
| Exact ABB order reference | 1SFA619210R1026 |
| ABB product series | C3SS compact selector switches |
| ABB type | C3SS1-10B-20 |
| Positions | Three maintained |
| Contacts | Two NO |
| Handle | Short, black |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
These ABB 1SFA619210R1026 values apply to the representative only. A related code can change voltage, contacts, dimensions, protocol, approval or rated duty; read its own label before substitution.
Order review
For ABB 1SFA619210R1026, the purchasing description needs the complete order reference and the relevant configuration. Check centre-position logic, contacts and panel legend. Request written clarification whenever a quoted alternative differs in suffix, revision, frame or accessory set.
The buyer should keep ABB 1SFA619210R1026 separate from service kits and companion accessories. Confirm quantity, mounting hardware, connection method and any software or configuration deliverable before issuing the order.
Service request
The work request for ABB 1SFA619210R1026 should state the failed function, the existing nameplate and the asset location. The intended application is to select among three defined operating modes. Record the actual circuit or control point so the replacement decision is tied to a specific duty, not to a visual resemblance.
If ABB 1SFA619210R1026 is proposed as a replacement, capture the former unit's complete designation and compare the functions that matter to the operating plant. A family match narrows the search but does not by itself authorize interchange.
Incoming inspection
When ABB 1SFA619210R1026 arrives, compare the box, device marking and paperwork with the purchase order. Look for shipping damage, missing parts, changed terminal layout or a different revision. Isolate a discrepant item until engineering resolves it.
Photograph the ABB 1SFA619210R1026 marking and preserve its traceability. A shared reference image on a website is not proof that a particular delivered unit has the same electrical rating or options.
Fit and interface
Before ABB 1SFA619210R1026 is installed, compare mechanical dimensions, panel opening or rack position, terminal arrangement, wiring diagram and environmental limits. On a networked product, include the addressing and software dependency review.
For ABB 1SFA619210R1026, document the power supply, connected load or instrument signal at the real interface. Any safety or protection function needs the approved design calculation and competent review.
Next maintenance cycle
Retain the final ABB 1SFA619210R1026 order code, drawings, settings and acceptance results with the asset history. This lets the next team distinguish an approved replacement from a superficially similar variant.
If ABB 1SFA619210R1026 later becomes unavailable, reassess the C3SS compact selector switches alternatives against the same service request. Do not assume that the next code in a catalog is a drop-in substitute.
Commissioning record
Qualified personnel should install ABB 1SFA619210R1026 under the site's isolation and permit procedure. After wiring or assembly, test each maintained position. Record the test conditions, result and any setting changed from the approved baseline.
The release to service for ABB 1SFA619210R1026 requires a successful functional test of the complete circuit, not just a powered indicator. Resolve unexpected alarms, communications or mechanical behavior before handover.
Other codes in this ABB series
The following codes are related to ABB 1SFA619210R1026 within the documented C3SS compact selector switches family. Their specifications and fit can differ. These references are represented on this page and will not be given separate product pages.
- 1SFA619213R1026
Handover condition
Accept ABB 1SFA619210R1026 only when the exact identity, installation interface and test record all agree.
Keep the approved ABB 1SFA619210R1026 documentation with the equipment record for later troubleshooting and purchasing.
