Where ABB 1SFA619105R1022 CP6-10G-20 belongs in the assembly

The ABB 1SFA619105R1022 CP6-10G-20 designation points to green heavy-duty compact pushbutton with two NO contacts. This brief records the critical ordering and field checks for that exact article.

Technical data and selection limits

Read the ABB 1SFA619105R1022 CP6-10G-20 values with the cited manufacturer publication and delivered marking; option-dependent ratings require confirmation at the site.

Position in the system

ABB 1SFA619105R1022 CP6-10G-20 is specified to give a documented two-contact command from the panel. Identify its physical location and functional purpose on the as-built drawing before treating any replacement as equivalent.

When buying ABB 1SFA619105R1022 CP6-10G-20, state the connected equipment, quantity and the reason for replacement. The short family label alone does not establish the required option or mounting fit.

What the order must contain

Use the complete ABB 1SFA619105R1022 CP6-10G-20 marking on the purchase request. Compare the delivered label with the approved bill of materials and retain photographs of any suffix, approval or revision.

For ABB 1SFA619105R1022 CP6-10G-20, check contact mapping, voltage, load and operator color. Where the surrounding assembly is safety-related, a qualified site engineer must approve the assembled function, not merely the appearance of the part.

Interface inventory

List every ABB 1SFA619105R1022 CP6-10G-20 mechanical and electrical interface: mounting, terminal, supply, contact arrangement, communication setting or fuse arrangement as applicable.

A visually similar part may not fit the ABB 1SFA619105R1022 CP6-10G-20 role. Record the relevant circuit values and dimensions, then resolve mismatches before an outage window is booked.

Work package

Before ABB 1SFA619105R1022 CP6-10G-20 is removed or installed, follow the site's isolation and stored-energy procedure. Preserve the original wiring map, configuration file or fuse selection evidence where applicable.

Label ABB 1SFA619105R1022 CP6-10G-20 connections, protect exposed terminals and keep the removed component until the acceptance record confirms correct operation.

Receipt inspection

At receipt, inspect ABB 1SFA619105R1022 CP6-10G-20 packaging and the exact manufacturer code. Confirm supplied accessories, contact or light blocks, terminal base, license and mounting parts where they are separately ordered.

If ABB 1SFA619105R1022 CP6-10G-20 arrives with a different finish, voltage, operator behavior or frame size, hold it for engineering review; do not infer a valid substitution from a similar photograph.

Commissioning evidence

After fitting ABB 1SFA619105R1022 CP6-10G-20, prove both NO paths and return action. Record the test conditions and the observed results against the approved design.

The ABB 1SFA619105R1022 CP6-10G-20 acceptance record should cover both normal operation and a controlled fault or off-state where relevant. Return the asset to service only after the responsible person signs off.

Future spare decision

File the ABB 1SFA619105R1022 CP6-10G-20 product identity, installation photo and verified tests with the equipment record so the next buyer can reproduce this decision.

When the ABB 1SFA619105R1022 CP6-10G-20 family is updated, ask the supplier to identify the revised order code and document differences in fit, voltage, contacts, software and approvals.

Other codes in this product position

These codes are grouped with ABB 1SFA619105R1022 CP6-10G-20 as same-series enquiry references only. They can differ in size, voltage, color, contacts or hardware generation, so they are not automatically interchangeable.

• 1SFA619105R1071
• 1SFA619105R1072
• 1SFA619105R1076

Release note

Confirm the complete ABB 1SFA619105R1022 CP6-10G-20 code, host fit and accepted functional test before closing the purchase or maintenance job.

Retain the ABB 1SFA619105R1022 CP6-10G-20 manufacturer reference and final as-left record with the asset.