ABB 1SDA105203R1 installation and procurement profile
ABB 1SDA105203R1 is the complete order identity for the Ekip cartridge accessory considered here. The purpose is to provide the approved Ekip option slots. The shared category photograph is illustrative; inspect the supplied ABB 1SDA105203R1 marking before acceptance.
Technical parameters and version boundary
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SDA105203R1 |
| Product family | Tmax XT Ekip two-slot cartridge options |
| Component role | Ekip cartridge accessory |
| Exact ABB order reference | 1SDA105203R1 |
| ABB product series | Tmax XT Ekip two-slot cartridge options |
| ABB order code | 1SDA105203R1 |
| ABB product designation | Ekip Cartridge 2 slots XT2-XT4-XT5 |
| Manufacturer description | Ekip Cartridge 2 slots XT2-XT4-XT5 |
| Slots | Two in ABB designation |
| Host | XT2/XT4/XT5 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB 1SDA105203R1 values above identify the manufacturer-stated designation. Confirm all host-specific limits from the ABB 1SDA105203R1 instructions and installed-equipment record before treating a neighboring code as a substitute.
Selection gate
The controlling fit check for ABB 1SDA105203R1 is XT2/XT4/XT5 host and cartridge interface. Compare this directly with the supplied part and the approved bill of materials.
If an ABB 1SDA105203R1 variant differs in frame, voltage, slots, contacts or firmware, stop the substitution until engineering approves that specific variant.
Installed equipment record
For ABB 1SDA105203R1, record the breaker or drive type, hardware revision, wiring drawing and the existing part marking. Match the complete ABB 1SDA105203R1 code, not just the family name.
Photograph the ABB 1SDA105203R1 connection or mounting position and note the asset number. This makes a later replacement or fault investigation traceable.
Receiving and storage
On arrival, compare ABB 1SDA105203R1 with the purchase order, ABB label and quantity. Check seals, contacts, board edges or mechanical pieces as appropriate to the part type.
Store ABB 1SDA105203R1 under the conditions specified for its product family; protect electronics from static discharge and keep safety-related accessories with their identification.
Electrical and mechanical interface
Inspect ABB 1SDA105203R1 connectors, terminal designations, clearances and mounting features against the host instructions. Do not force an ABB 1SDA105203R1 part into a similar-looking assembly.
Where ABB 1SDA105203R1 carries a rated voltage, current or communication speed in the designation, confirm that the installed circuit is within the exact product limit.
Preparation for replacement
Before work on ABB 1SDA105203R1, isolate the relevant energy sources and follow the applicable site procedure. Capture configuration, wiring and original settings where the ABB 1SDA105203R1 role requires them.
Use the ABB 1SDA105203R1 host manual to confirm installation order, accessory compatibility, torque and protective covers before energizing.
Functional acceptance
After ABB 1SDA105203R1 has been installed, verify module recognition and assigned functions. Check the normal state and an appropriate alternate or fault state under the approved commissioning procedure.
Record ABB 1SDA105203R1 results, any parameter changes, residual alarms and the person approving return to service.
Future spare identification
Keep ABB 1SDA105203R1 in the asset spare list with the full order code, supported host and variant restrictions. A shorthand name can hide important technical differences.
For future enquiries, send the ABB 1SDA105203R1 designation together with a nameplate photo and the installation record so the exact replacement can be confirmed.
Procurement handover
Include ABB 1SDA105203R1 and the verified host in the final spare-parts request.
Retain the ABB 1SDA105203R1 receipt and commissioning result with the equipment history.
