Where ABB 1SCA101661R1001 belongs in the switch assembly
ABB 1SCA101661R1001 belongs to OXS selector-handle shafts and is identified as OXS6X330 selector-handle shaft. The shared category image is a reference only; it does not certify the exact appearance of ABB 1SCA101661R1001.
The technical table captures verified ABB 1SCA101661R1001 identification and the checks that determine whether the article fits a particular switchboard or machine.
Technical data and interface checks
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SCA101661R1001 |
| Product family | OXS selector-handle shafts |
| Component role | OXS6X330 selector-handle shaft |
| Exact ABB order reference | 1SCA101661R1001 |
| ABB product series | OXS selector-handle shafts |
| ABB type | OXS6X330 |
| Function | Shaft for selector handle |
| Listed length | 330 in the manufacturer designation; verify unit and cut length |
| Boundary | Match handle and switch mechanism |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Operational sequence
Map the state or function ABB 1SCA101661R1001 must provide within the complete switch or breaker arrangement. Identify the expected normal, maintenance and fault positions.
Commission ABB 1SCA101661R1001 only after checking adjacent mechanisms and interlocks. A part can fit mechanically yet create an unsafe operating sequence.
Equipment boundary
ABB 1SCA101661R1001 is specified for OXS selector-handle shafts. Its intended use is to couple the selector handle to the intended switch. Identify the host assembly and duty before selecting this exact article.
A matching visual outline is not enough for ABB 1SCA101661R1001. Compare the manufacturer's order code, variant, host series and installation drawings.
Connection and physical fit
Check handle interface, depth, shaft profile and enclosure for ABB 1SCA101661R1001. Include the connection side, panel depth, terminal design and any control wiring in the review.
If another variant is proposed in place of ABB 1SCA101661R1001, request a comparison of the changed dimensions, electrical limits, included pieces and approval conditions.
Safe installation
Isolate all relevant supplies before working around ABB 1SCA101661R1001; follow ABB and site procedures for stored energy, test points and lockout. Record the existing part orientation and wiring.
Mount ABB 1SCA101661R1001 with the specified fixing hardware. Recheck phase clearance, earth continuity, cable routing, torque and protective cover position as applicable.
Receiving and identification
On receipt of ABB 1SCA101661R1001, compare the package label and manufacturer marking with the approved purchase line. Inspect covers, connectors, contacts and included hardware.
Quarantine ABB 1SCA101661R1001 if the code, revision or condition differs. Keep photos and supplier clarification in the maintenance record before installation.
Functional acceptance
After installing ABB 1SCA101661R1001, test full travel without binding. Use an approved test plan and record both positive operation and inhibited or fault states.
Retain the ABB 1SCA101661R1001 as-left code, host identity, measurements and authorizing sign-off. Do not treat packaging acceptance as a substitute for site testing.
Spare-parts handover
Register ABB 1SCA101661R1001 with its complete article number and compatible equipment. Keep any size, pole, voltage or controller restrictions beside the stock record.
For future ABB 1SCA101661R1001 enquiries, pass on the installed-system drawing and approved selection evidence so buyers do not substitute a different variant by name alone.
Order and acceptance record
State ABB 1SCA101661R1001 in full, plus quantity, host equipment and the required operating or installation limits.
File the ABB 1SCA101661R1001 delivery identity and commissioning result with the equipment history.
