ABB 1SCA022627R0310 application-selection record
Use the following selection gates to decide whether ABB 1SCA022627R0310 is the correct component for the intended circuit or control assembly.
Verified technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SCA022627R0310 |
| Product family | OFAF000H4 |
| Component role | DIN-type gG HRC fuse link |
| ABB order code | 1SCA022627R0310 |
| Catalog designation | OFAF000H4 |
| Representative rating | 4 A, NH000 |
| Voltage | 500 V AC / 250 V DC catalog listing |
| Characteristic | gG general protection |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
ABB 1SCA022627R0310 values are configuration-specific; compare them with the delivered marking and the linked ABB publication.
Identity gate
Start with the exact ABB 1SCA022627R0310 order code. Check the delivered marking, catalog designation and the asset drawing before comparing any alternative.
A shared image only illustrates the ABB 1SCA022627R0310 family; it is not proof of a specific voltage, fuse size, contact block or switch orientation.
Interface gate
List everything that ABB 1SCA022627R0310 connects to: conductors, a host device, fieldbus, operator handle or signal terminal as relevant. Confirm mounting and electrical clearance from the manufacturer drawing.
The exact ABB 1SCA022627R0310 interface is more important than a similar part shape. Record the mating components and their full codes on the purchase specification.
Application gate
ABB 1SCA022627R0310 is intended here to protect the matched fuse-switch circuit. Map the normal operating state, isolation state and any status signals before choosing the assembly.
For ABB 1SCA022627R0310, confirm fuse size, current and breaking capacity. If the surrounding equipment changes, repeat the selection rather than carrying over the former rating.
Commissioning gate
After installation by qualified personnel, test ABB 1SCA022627R0310 with the system isolated or energized only as permitted by the approved procedure. Observe both normal and return-to-safe states.
On ABB 1SCA022627R0310, verify holder fit and fuse continuity. Record measured values where the application requires them rather than treating this general guide as an acceptance certificate.
Risk gate
Consider what happens if ABB 1SCA022627R0310 does not switch, report or protect as designed. Design the upstream protective scheme and any interlock independently of the catalog picture.
For ABB 1SCA022627R0310, a different size, timing, voltage or approval may change the failure response. Keep the delivered revision and test result with the asset record.
Procurement gate
Quote ABB 1SCA022627R0310 without shortening the suffix. Verify availability, compatible accessories and any manufacturer lifecycle status before committing to a substitution.
Attach the ABB 1SCA022627R0310 source reference and the exact configuration decision to the order so future repairs can trace the selected part.
Related family codes, not separate pages
The ABB codes below are retained on this ABB 1SCA022627R0310 page. Different ratings, dimensions and options are not interchangeable without separate verification.
- 1SCA022627R1120
- 1SCA022627R1210
- 1SCA022627R1390
- 1SCA022627R1550
- 1SCA022627R1630
- 1SCA022627R4310
Decision and record
Select ABB 1SCA022627R0310 only when identity, electrical function, mechanical fit and commissioning evidence all agree.
Retain the ABB 1SCA022627R0310 decision with the manufacturer reference and as-built drawings.
