Process-data recording with the Yokogawa DX2030-3-4-2
Use Yokogawa DX2030-3-4-2 where continuous acquisition and electronic recording of process measurements. First document the operating objective and the existing installation. For DX2030-3-4-2, the model code is a configuration identifier, so confirm the exact suffix against the nameplate and purchasing record rather than inferring undocumented options.
Specification snapshot
| Selection point | Specification / confirmation |
|---|---|
| Representative model | DX2030-3-4-2 |
| Recorder | DAQSTATION DX2000 paperless recorder |
| Model capacity | DX2030 30-channel family |
| Inputs | Signal and channel configuration depend on installed options |
| Confirm | Input mix, recording interval, storage, communication and alarm options |
What the order code must resolve
The selection review for DX2030-3-4-2 should cover the DX2030 30-channel recorder platform and the input, alarm, storage and communication options in the complete code. Treat each confirmed option as part of the application record; do not assume that another suffix in the family has the same I/O, connection or approval status. The table summarizes the checks that matter before the code is released.
Installation context
Capture the channel schedule, signal types, measurement ranges, scan and recording interval, alarm needs and data-retention policy. For a practical DX2030-3-4-2 installation, the enclosure, cabling, process conditions, grounding or mounting arrangement all affect whether the selected build can be commissioned cleanly. Resolve these points using the current Yokogawa documents and the site's engineering standard.
Field handover
Use DX2030-3-4-2 as the reference in the work pack and verify input modules, isolation, record media, network interfaces, time synchronization and installed option codes. validate representative points and exported records after setup, including units, timestamps, alarm/event records and retention procedures. Record the completed checks and retain the exact code DX2030-3-4-2 in the maintenance history so later service work can identify the installed configuration.
Related model configurations
The following codes are related configurations for comparison. They are not asserted as direct equivalents.
- DX2030-3-4-3/A5/C2/C3
Model-code verification
For Yokogawa DX2030-3-4-2, include the complete nameplate code, application, interface and operating conditions in the enquiry. Retain DX2030-3-4-2 with the equipment record and verify the applicable specification before replacement or project release.
