Specifying AVENTICS 0820019968 DO22-3/2NC-SPEZ-NO_COIL for Reliable DO22 electrically actuated 3/2 normally-closed valve Service
AVENTICS 0820019968 DO22-3/2NC-SPEZ-NO_COIL is a specific do22 electrically actuated 3/2 normally-closed valve configuration for buyers comparing industrial equipment. Compact point-of-use pneumatic switching where the valve is supplied without its coil. The correct application of 0820019968 DO22-3/2NC-SPEZ-NO_COIL depends on the complete manufacturer configuration and the actual installation conditions.
Start with the installed system
When evaluating AVENTICS 0820019968 DO22-3/2NC-SPEZ-NO_COIL, identify what the device controls or measures, where it is installed and how its output or state is used by the control system. This context determines whether the selected do22 electrically actuated 3/2 normally-closed valve build is appropriate.
Function and application context
This Series DO22 model is a 3/2 normally-closed, spring-return valve with a base-plate connection and M5 output. Manufacturer data identifies a 61 l/min nominal flow, 0–10 bar working pressure and IP65 protection with its connector; the product is supplied without a coil.
| Exact model | 0820019968 DO22-3/2NC-SPEZ-NO_COIL |
|---|---|
| Product family | DO22 electrically actuated 3/2 normally-closed valve |
| Typical function | Compact point-of-use pneumatic switching where the valve is supplied without its coil. |
| Selection review | Check coil compatibility and include the required coil and electrical connector in the bill of materials. Verify base plate, M5 port, logic state, manual override, supply-air range, seal compatibility and mounting orientation. |
Installation questions
Check coil compatibility and include the required coil and electrical connector in the bill of materials. Verify base plate, M5 port, logic state, manual override, supply-air range, seal compatibility and mounting orientation.
Replacement and lifecycle notes
A replacement request for AVENTICS 0820019968 DO22-3/2NC-SPEZ-NO_COIL should include a readable nameplate image, complete code, application, operating conditions and interface details. Ask the supplier to confirm compatibility and current availability before treating a substitute as interchangeable.
For sourcing or servicing AVENTICS 0820019968 DO22-3/2NC-SPEZ-NO_COIL, use the complete identifier and verify application compatibility, configuration, installation requirements and current manufacturer availability. Keep the confirmed code 0820019968 DO22-3/2NC-SPEZ-NO_COIL with the equipment record. When reviewing a quotation, check that AVENTICS 0820019968 DO22-3/2NC-SPEZ-NO_COIL matches the nameplate and the intended system interfaces. For replacement planning, retain the exact 0820019968 DO22-3/2NC-SPEZ-NO_COIL code in the maintenance file.
