low voltage

Hotline

Fluke 789 ProcessMeter 24-Volt calibration multimeter here.

description:Fluke 789 ProcessMeter 24-Volt loop supply calibration multimeter Fluke789....
BASIC INFO
Product overview

      
Fluke 789 ProcessMeter 24-Volt loop supply calibration multimeter Fluke789.
                                 Fluke 789

Fluke 789 ProcessMeter product overview.
Fluke 789 loop calibration multimeter has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing.
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect™ with ShareLive™ video call (sold separately), process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you.


Fluke 789 ProcessMeter product features.
Features of the Fluke 789:
 
24 V Loop power supply
Very large dual display
Enhanced backlight with 2 brightness settings
1200 ohm drive capability on mA source
HART mode setting with loop power and a built-in 250 ohm resistor
0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check
Externally accessible fuses for easy replacement
Infrared-port to process data in FlukeView Forms (V2.1) software
Fluke 789 features that are also included in the Fluke 787:
 
Precision 1000 V, 440 mA True-RMS digital multimeter
0.1% dc voltage accuracy
0.05% dc current accuracy
Frequency measurement to 20 kHz
Min/Max/Average/Hold/Relative modes
Diode Test and Continuity Beeper
Simultaneous mA and % of scale readout
20 mA DC current source / loop calibrator / simulator
Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
Externally accessible battery for easy battery changes
 
Fluke 789 ProcessMeter product specification.
Specifications
Current measurement Range 0-1 A AC or DC
Resolution 1 mA
Accuracy 0.2% + 2 LSD (DC)
Range 0-30 mA
Resolution 0.001 mA
Accuracy 0.05% + 2 lSD
Current sourcing Range 0-20 mA or 4-20 mA
Resolution 0.05% of span
Drive capability 24 V Compliance or 1200 Ω @ 20 mA
Frequency to 19.999 kHz, 0.005% + 1 LSD
Continuity Beeps for resistance < 100 Ω
Voltage measurement Range 0-1000 V AC (true-rms) or DC
Resolution 0.1 mV to 1.0 V
Accuracy 0.1% Rdg + 1 LSD (VDC)
Resistance measurement to 40 MΩ, 0.2% + 1 LSD
Diode test 2.0 V shoes diode voltage drop
Display current and % of span Yes
Auto Step, Auto Ramp Yes
Environmental Specifications
Operating temperature -20°C to 55°C
Storage temperature -40°C to 60°C
Humidity (without condensation) 95% up to 30°C 
75% up to 40°C 
45% up to 50°C 
35% up to 55°C
Temperature coefficient 0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C)
Safety Specifications
Electrical safety Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92
Overvoltage category IEC 1010-1 CAT III 1000 V 
IEC 1010-1 CAT IV 600 V
Maximum voltage 1000 V RMS
Mechanical and General Specifications
Size (H x W x L) 50 x 100 x 203 mm (1.25 x 3.41 x 7.35 in)
Weight 610 g (1.6 lbs)
Batteries 4 AA alkaline batteries
Warranty 3 years
Battery life 140 hours typical (measurement), 10 hours typical (sourcing 20 mA)
Shock and vibration Random, 2 g, 5-500 Hz 
1 meter drop test


Other Selection models:
1. (temperature calibrator)
Fluke 712B RTD Calibrator
Fluke 714B Thermocouple Calibrator
Fluke 754 Documenting Process Calibrator-HART
Fluke 753 Documenting Process Calibrator
Fluke 726 Precision Multifunction Process Calibrator
Fluke 725 Multifunction Process Calibrator
Fluke 725Ex Intrinsically Safe Multifunction Process Calibrator
Fluke 724 Temperature Calibrator
Fluke Calibration 1551a Stik Thermometer
Fluke Calibration 1552a Stik Thermometer
Fluke Calibration 1523 Handheld Thermometer Readout
Fluke 714 Thermocouple Calibrator
Fluke Calibration 1524 Handheld Thermometer Readout
 
 2. Pressure Calibrators
Fluke 750P Series Pressure Modules
Fluke 754 Documenting Process Calibrator-HART
Fluke 753 Documenting Process Calibrator
Fluke 726 Precision Multifunction Process Calibrator
Fluke 725 Multifunction Process Calibrator
Fluke 725Ex Intrinsically Safe Multifunction Process Calibrator
Fluke 719 Pressure Calibrator
Fluke 700G Precision Pressure Gauge Calibrator
Fluke 721 Precision Pressure Calibrator
Fluke 719Pro Electric Pressure Calibrator
Fluke 717 Pressure Calibrator
Fluke 718 Pressure Calibrator
Fluke 718Ex Intrinsically Safe Pressure Calibrator
 
3.(Multifunction Calibrators)
Fluke 154 HART Calibration Assistant
Fluke 754 Documenting Process Calibrator-HART
Fluke 753 Documenting Process Calibrator
Fluke 726 Precision Multifunction Process Calibrator
Fluke 725 Multifunction Process Calibrator
Fluke 725Ex Intrinsically Safe Multifunction Process Calibrator
 
4.(mA loop calibrator)
Fluke 789 ProcessMeter™
Fluke 719 Pressure Calibrator
Fluke 709 Precision Loop Calibrator
Fluke 709H Precision Loop Calibrator with HART Communications / Diagnostics 
Fluke 707 Loop Calibrator with Quick Click Knob
Fluke 707Ex Intrinsically Safe Loop Calibrator
Fluke 715 Volt/mA Calibrator
Fluke 705 Loop Calibrator
Fluke 771 Milliamp Process Clamp Meter
Fluke 772 Milliamp Clamp Meter
Fluke 787 ProcessMeterTM
Fluke 773 Milliamp Process Clamp Meter
 

For more information about Fluke 789 ProcessMeter, please feel free to contact us here.
Contact details

HONGKONG XIEYUAN TECH CO., LIMITED
Telephone:86-027-85880977
Mobile :86-13545206420(Whatapp&Wechat is available)
Fax:86-027-85309780
Skype:Diana@hkxytech.com
E-mail:Diana@hkxytech.com    Or Cc:
Dianatian118@gmail.com
Website:www.hkxy-lowvoltage.com






Pre:Fluke 154 HART Calib Next:Fluke 709 Precision Loop Calibrator brand new product here.
 Footer begin -->