low voltage

Hotline

high quality Fluke 773 Milliamp Process Clamp Meter.

description:Fluke 773 Milliamp Process Clamp Meter signal measurement Process Clamp Meter....
BASIC INFO
Product overview

   
Fluke 773 Milliamp Process Clamp Meter signal measurement Process Clamp Meter.
                Fluke 773

Fluke 773 Milliamp Process Clamp Meter product overview.

Milliamp Clamp Features

Measure mA signals for PLC and control system analog I/O without breaking the loop

  • Measures low level dc current
  • Correlate process indication with real physical value

Measure output signals from transmitters without breaking the loop

  • Maintain and troubleshoot process and automation equipment without breaking the loop
  • No disruption to the process

Detachable clamp with extension cable

  • Measurements in tight locations
  • Enables measurements in difficult situations

Measurement Spotlight

  • Illuminates hard to see wires in dark enclosures
  • Measurement process is easier and quicker

Measure up to 99.9 mA range non-contact

  • Wide range of measurements
  • Measures 10 to 50 mA signals in older control systems

Automatic power off

  • After 15 minutes and 2 minute automatic off for backlight and spotlight
  • Saves battery life

Fluke 773 Milliamp Process Clamp Meter product features.
  • Best in class 0.2% accuracy
  • 0.01 mA resolution and sensitivity
  • Measure 4 to 20 mA signals without “breaking the loop”
  • Measure mA signals for PLC and control system analog I/O
  • Dual backlit display with both mA measurement and percent of 4 to 20 mA span
  • Measurement Spotlight illuminates hard to see wires in dark enclosures
  • Detachable clamp with extension cable for measurements in tight locations
  • Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
  • Automatically change the 4 to 20 mA output for remote testing
  • Power saving features, auto-off, backlight timeout extend battery life
  • Hold function captures and displays changing measurements
  • Measure 4 to 20 mA signals with in-circuit measurement
  • Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
  • Source 4 to 20 mA signals for testing control system I/O or I/Ps
  • mA output linear ramp or 25% step output
  • Automatically change the 4 to 20 mA output for remote testing
  • DC voltage measurement to verify 24V power supplies or voltage I/O signals
  • Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
  • Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
  • Enables milliamp signal logging to a separate logging device without breaking the loop
  • Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop
  • mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
  • Apply a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators
  • Voltage output linear ramp or 25% step output
  • Automatically change the voltage output for remote testing

Fluke 773 Milliamp Process Clamp Meter product specification.
Specifications
Diameter of measurable conductor 0.177" or 4.5 mm max
Operating temperature -10 to 50ºC
Storage temperature -25 to 60ºC
Operating humidity < 90% @ <30ºC, < 75% @ 30 to 55ºC
Operating altitude 0 to 2000 m
IP rating IP 40
Size 44 x 70 x 246 mm (2 7/8 x 5 ¾ x 11 5/8 in)
Weight 410 g, (14.4 oz)
Vibration Random 2 g, 5 to 500 Hz
Shock 1 meter drop test (except the jaw)
EMI/RFI Meets EN61326-1
For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m.
Temperature coefficient 0.01% ºC 
(< 18ºC or > 28ºC)
Power, battery life (4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms
Warranty Three years for electronics 
One year for cable and clamp assembly
Functional Specifications
mA measurement 
(measured by clamp)
Resolution / range 0 to 20.99 mA
Accuracy 0.2% + 5 counts
Resolution / range 21.0mA to 100.0 mA
Accuracy 1% + 5 counts
mA measurement (measured in series with test jacks) Resolution / range 0 to 24.00 mA
Accuracy 0.2% + 2 counts
mA source (maximum mA drive: 24 mA into 1,000 ohms) Resolution / range 0 to 24.00 mA
Accuracy 0.2% + 2 counts
mA simulate (maximum voltage 50 V dc) Resolution / range 0 to 24.00 mA
Accuracy 0.2% + 2 counts
Voltage source (2 mA maximum drive current) Resolution / range 0 to 10.00 V DC
Accuracy 0.2% + 2 counts
Voltage measure Resolution / range 0 to 30.00 V DC
Accuracy 0.2% + 2 counts


Other related product for Fluke calibrators.
1. (temperature calibrator)
Fluke 712B RTD Calibrator
Fluke 714B Thermocouple Calibrator
Fluke 754 Documenting Process Calibrator-HART
Fluke 753 Documenting Process Calibrator
Fluke 726 Precision Multifunction Process Calibrator
Fluke 725 Multifunction Process Calibrator
Fluke 725Ex Intrinsically Safe Multifunction Process Calibrator
Fluke 724 Temperature Calibrator
Fluke Calibration 1551a Stik Thermometer
Fluke Calibration 1552a Stik Thermometer
Fluke Calibration 1523 Handheld Thermometer Readout
Fluke 714 Thermocouple Calibrator
Fluke Calibration 1524 Handheld Thermometer Readout
2. Pressure Calibrators
Fluke 750P Series Pressure Modules
Fluke 754 Documenting Process Calibrator-HART
Fluke 753 Documenting Process Calibrator
Fluke 726 Precision Multifunction Process Calibrator
Fluke 725 Multifunction Process Calibrator
Fluke 725Ex Intrinsically Safe Multifunction Process Calibrator
Fluke 719 Pressure Calibrator
Fluke 700G Precision Pressure Gauge Calibrator
Fluke 721 Precision Pressure Calibrator
Fluke 719Pro Electric Pressure Calibrator
Fluke 717 Pressure Calibrator
Fluke 718 Pressure Calibrator
Fluke 718Ex Intrinsically Safe Pressure Calibrator
 3.(Multifunction Calibrators)
Fluke 154 HART Calibration Assistant
Fluke 754 Documenting Process Calibrator-HART
Fluke 753 Documenting Process Calibrator
Fluke 726 Precision Multifunction Process Calibrator
Fluke 725 Multifunction Process Calibrator
Fluke 725Ex Intrinsically Safe Multifunction Process Calibrator
 4.(mA loop calibrator)
Fluke 789 ProcessMeter™
Fluke 719 Pressure Calibrator
Fluke 709 Precision Loop Calibrator
Fluke 709H Precision Loop Calibrator with HART Communications / Diagnostics 
Fluke 707 Loop Calibrator with Quick Click Knob
Fluke 707Ex Intrinsically Safe Loop Calibrator
Fluke 715 Volt/mA Calibrator
Fluke 705 Loop Calibrator
Fluke 771 Milliamp Process Clamp Meter
Fluke 772 Milliamp Clamp Meter
Fluke 787 ProcessMeterTM
Fluke 773 Milliamp Process Clamp Meter
 

For more information about Fluke 773 Milliamp Process Clamp Meter, please feel free to contact us here.
Contact details
HONGKONG XIEYUAN TECH CO., LIMITED
Telephone:86-027-85880977
Mobile :86-13545206420(Whatapp&Wechat is available)
Fax:86-027-85309780
Skype:Diana@hkxytech.com
E-mail:Diana@hkxytech.com    Or Cc:
Dianatian118@gmail.com
Website:www.hkxy-lowvoltage.com






Pre:Fluke 772 Milliamp C Next:Brand new Fluke 725 Multifunction Process Calibrator stock.
 Footer begin -->