low voltage

Hotline

Fluke709H Precision Loop Calibrator with HART Communication.

description:Fluke 709H Precision Loop Calibrator with HART Communications / Diagnostics....
BASIC INFO
Product overview

     
Fluke 709H Precision Loop Calibrator with HART Communications / Diagnostics.
                           Fluke 709
 
Fluke 709H Precision Loop Calibrator product overview.
The Fluke 709H mA loop calibrator is designed to save time and produce high-quality results. The 709H has HART communication and supports a select set of the HART universal and common practice commands.


Fluke 709H Precision Loop Calibrator product features.
The Fluke 709H calibrator is built around a user friendly interface with a Quick-Set rotary encoder knob. This tool reduces the time it takes to measure, or source, voltage or current and power up a loop. The protective holster easily fits into a technician’s hand and the large backlit display is easy to read, even in dark, cramped worked areas. The 709H offers:
Best-in-class accuracy at 0.01% reading
Small rugged design operates on (6) standard AAA batteries
Intuitive user interface with Quick-Set knob for fast setup, easy use
Built in selectable 250 resistor for HART communication
24 V DC loop power with mA Measure Mode (-25% to 125%)
Resolution of 1 µA on mA ranges and 1 mV on voltages ranges
Simple two wire connection for all measurements
Auto Shutdown to conserve battery life (adjustable up to 30 minutes)
Variable step & ramp time in seconds
Adjustable span selection (0 to 20 mA or 4 to 20 mA)
Valve Test (simulate defined mA values with % keys)

Fluke 709H Precision Loop Calibrator product specification.
HART specific capabilities include:
Fast transfer of calibration data. The 709H/Track software/cable documents the parameters of all the HART transmitters in your plant, in either (.csv) or (.txt) format.
Data logging or recording data on a particular transmitter for troubleshooting. The data log tool offers selectable capture interval from 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions. Each data sample contains the 709H measurement, all four process variables, and the standard status conditions.
In the communicator mode the user will be able to read basic device information, perform diagnostic tests, and trim the calibration on most HART enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with HART modem. Fluke 709H will allow virtually any technician to service and support HART devices.


Detailed Specifications
Functions mA source, mA simulate, mA read, mA read/loop power, and volts read.
Ranges mA (0 to 24 mA) and Volts (0 to 30 V DC)
Resolution 1 µA on mA ranges and 1 mV on voltage range
Accuracy 0.01% ± 2 counts, all ranges (@23° ± 5°C)
Operating temperature range -10°C to 55°C (14°F to 131°F)
Humidity range 10 to 95% non-condensing
Stability 20 ppm of F.S. /°C from -10°C to 18°C and 28°C to 55°C
Display 128 x 64 pixels, LCD Graphic w/backlight, .34 high digits
Power 6 AAA alkaline
Battery life 40 hours typical
Loop compliance voltage 24 V DC @ 20mA
Over-voltage protection 240 V AC
Overload current protection 28 mA DC
EMC EN61326 Annex A (Portable Instruments)
Dimensions (L x W x D) 15 x 9 x 3 cm (6 x 3.6 x 1.3 in)
Weight 0.3 kg (9.5 oz)
Included accessories NIST traceable calibration certificate with data, batteries, test leads, and manual
Warranty Three year


Other Selection models:
1. (temperature calibrator)
Fluke 712B RTD Calibrator
Fluke 714B Thermocouple Calibrator
Fluke 754 Documenting Process Calibrator-HART
Fluke 753 Documenting Process Calibrator
Fluke 726 Precision Multifunction Process Calibrator
Fluke 725 Multifunction Process Calibrator
Fluke 725Ex Intrinsically Safe Multifunction Process Calibrator
Fluke 724 Temperature Calibrator
Fluke Calibration 1551a Stik Thermometer
Fluke Calibration 1552a Stik Thermometer
Fluke Calibration 1523 Handheld Thermometer Readout
Fluke 714 Thermocouple Calibrator
Fluke Calibration 1524 Handheld Thermometer Readout
 
 2. Pressure Calibrators
Fluke 750P Series Pressure Modules
Fluke 754 Documenting Process Calibrator-HART
Fluke 753 Documenting Process Calibrator
Fluke 726 Precision Multifunction Process Calibrator
Fluke 725 Multifunction Process Calibrator
Fluke 725Ex Intrinsically Safe Multifunction Process Calibrator
Fluke 719 Pressure Calibrator
Fluke 700G Precision Pressure Gauge Calibrator
Fluke 721 Precision Pressure Calibrator
Fluke 719Pro Electric Pressure Calibrator
Fluke 717 Pressure Calibrator
Fluke 718 Pressure Calibrator
Fluke 718Ex Intrinsically Safe Pressure Calibrator
 
3.(Multifunction Calibrators)
Fluke 154 HART Calibration Assistant
Fluke 754 Documenting Process Calibrator-HART
Fluke 753 Documenting Process Calibrator
Fluke 726 Precision Multifunction Process Calibrator
Fluke 725 Multifunction Process Calibrator
Fluke 725Ex Intrinsically Safe Multifunction Process Calibrator
 
4.(mA loop calibrator)
Fluke 789 ProcessMeter™
Fluke 719 Pressure Calibrator
Fluke 709 Precision Loop Calibrator
Fluke 709H Precision Loop Calibrator with HART Communications / Diagnostics 
Fluke 707 Loop Calibrator with Quick Click Knob
Fluke 707Ex Intrinsically Safe Loop Calibrator
Fluke 715 Volt/mA Calibrator
Fluke 705 Loop Calibrator
Fluke 771 Milliamp Process Clamp Meter
Fluke 772 Milliamp Clamp Meter
Fluke 787 ProcessMeterTM
Fluke 773 Milliamp Process Clamp Meter
 

For more information about Fluke 709H Precision Loop Calibrator, please feel free to contact us here.
Contact details
HONGKONG XIEYUAN TECH CO., LIMITED
Telephone:86-027-85880977
Mobile :86-13545206420(Whatapp&Wechat is available)
Fax:86-027-85309780
Skype:Diana@hkxytech.com
E-mail:Diana@hkxytech.com    Or Cc:
Dianatian118@gmail.com
Website:www.hkxy-lowvoltage.com





 

Pre:Fluke 709 Precision Next:Fluke 707 Loop Calibrator with Quick Click Knob for sale
 Footer begin -->