New arrival Fluke 718 300G pressure calibrator product here.
Good news!
New arrival Fluke 718 300G pressure calibrator product in stock now with good price!
![Fluke 718](/uploads/allimg/180703/1-1PF315305I11.jpg)
Fluke 718 300G pressure calibrator product technical specification.
Fluke 718 300G pressure calibrator product details picture for your reference.
![Fluke 718 300G](/uploads/allimg/180703/1-1PF315415CX.jpg)
Fluke 718 300G pressure calibrator calibration certificate as below.
![Fluke 718 300G](/uploads/allimg/180703/1-1PF3154235646.jpg)
Fluke 718 300G pressure calibrator product package.
![Fluke 718 300G](/uploads/allimg/180703/1-1PF3154250E7.jpg)
Dear customer, if you need more information about our Fluke product, please feel free to send us an email.
Contact details
HONGKONG XIEYUAN TECH CO., LIMITED
Telephone:86-027-85880977
Mobile :86-13545206420(Whatapp&Wechat is available)
Fax:86-027-85309780
Skype:Diana@hkxytech.com
E-mail:Diana@hkxytech.com Or Cc:Dianatian118@gmail.com
Website:www.hkxy-lowvoltage.com
New arrival Fluke 718 300G pressure calibrator product in stock now with good price!
![Fluke 718](/uploads/allimg/180703/1-1PF315305I11.jpg)
Fluke 718 300G pressure calibrator product technical specification.
Technical Specifications | ||
Fluke 718 Series | ||
Measure pressure | (Internal sensor) | |
Accuracy | 0.025% full scale | |
Functions | Zero, min/max, hold, damp | |
Dry air, non-corrosives only | ||
Fluke 718 1G | ||
Range | -1 psi to +1 psi, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa) | |
Resolution | 0.0001 psi, 0.001 mbar, 0.0001 kPa | |
Over pressure | 5x Full Scale | |
Functions | Zero, Min, Max, Hold, Damp | |
Fluke 718 30G | ||
Range | -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa) | |
Resolution | 0.001 psi, 0.1 mbar, 0.01 kPa | |
Over pressure | 5x Full Scale | |
Functions | Zero, Min, Max, Hold, Damp | |
Fluke 718 100G | ||
Range | -12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa) | |
Resolution | 0.01 psi, 0.1 mbar, 0.01 kPa | |
Over pressure | 2x Full Scale | |
Functions | Zero, Min, Max, Hold, Damp | |
Fluke 718 300G | ||
Range | -12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa) | |
Resolution | 0.01 psi, 1 mbar, 0.1 kPa | |
Over pressure | 375 psi 25 bar | |
Functions | Zero, Min, Max, Hold, Damp | |
Fluke 718 series via 700 Series Pressure Modules | ||
Range | 29 pressure modules, 0 – 1 inH20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs | |
Resolution | Per pressure module specs | |
Accuracy | To 0.025% of full span, per pressure module specs | |
Functions | Zero, Min, Max, Hold, Damp | |
Media compatibility per pressure module specs | ||
Fluke 718 Series Via Built in Pump | ||
Range | -12 psi or -850 mbar to full scale Supported Pressure Units; psi, inH20 (4°C), inH20 (20°C), cmH20 (4°C), cmH20 (20°C), bar, mbar, kPa, inHg, mmHg, kg/cm | |
Loop power range | 24 V DC | |
Accuracy | ±10% | |
Drive; 20 mA into 1000 Ω for battery > 6.8 V; 700 Ω for battery 5.8 to 6.8 V | ||
mA Measure | ||
Range | 0 mA to 24 mA | |
Resolution | 0.001 mA | |
Accuracy | 0.015% + 1 count | |
General Specifications | ||
Maximum voltage | 30 volts (non-operating) | |
Temperature | -40°C to 60°C | |
Operating temperature | -10°C to 55°C | |
Relative humidity | 95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C) | |
Operating altitude | 3,000 M max | |
Shock | 1 M drop test | |
Vibration | Random, 2 g, 5 Hz – 500 Hz | |
Safety | CSA C22.2 No. 1010.1: 1992 | |
EMC | EN50082-1: 1992 and EN55022: 1994 Class B | |
Size | 216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in) | |
Weight | 992 g (35 oz) | |
Power, battery life | 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718 | |
Battery life | 4 to 20 hours typical, depending on functions used | |
Warranty | Three years (one year on pressure pump in Fluke 718) | |
Display | LCD, 5 digit pressure and current simultaneous | |
For use with non-corrosive gasses |
Model Name | Description | |
---|---|---|
Fluke 718 1G |
Fluke 718 1G Pressure Calibrator -1 to 1 psi, (-68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa) |
|
Fluke 718 30G |
Fluke 718 30G Pressure Calibrator -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa) |
|
Fluke 718 100G |
Fluke 718 100G Pressure Calibrator -12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa) |
|
Fluke 718 300G |
Fluke 718 300G Pressure Calibrator -12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa ) |
|
![Fluke 718 300G](/uploads/allimg/180703/1-1PF315415CX.jpg)
Fluke 718 300G pressure calibrator calibration certificate as below.
![Fluke 718 300G](/uploads/allimg/180703/1-1PF3154235646.jpg)
Fluke 718 300G pressure calibrator product package.
![Fluke 718 300G](/uploads/allimg/180703/1-1PF3154250E7.jpg)
Dear customer, if you need more information about our Fluke product, please feel free to send us an email.
Contact details
HONGKONG XIEYUAN TECH CO., LIMITED
Telephone:86-027-85880977
Mobile :86-13545206420(Whatapp&Wechat is available)
Fax:86-027-85309780
Skype:Diana@hkxytech.com
E-mail:Diana@hkxytech.com Or Cc:Dianatian118@gmail.com
Website:www.hkxy-lowvoltage.com